Installation Manual - Fireplaces

20 Installation (for qualified installers only)Electrical Connection (required)• The electrical line to the grounded receptacle inside the fireplace must be installed by a qualifiedinstaller and must meet all local codes.• Make sure the household breaker is shut off prior to working on any electrical lines.• The appliance, when installed, must be electrically grounded in accordance with local codes or, in theabsence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian ElectricalCode, CSA C22.1.• The electrical line must be a min. 14 gauge, and supply 120 Volts at 60 Hz (2 Amps).Caution:Label all wires prior to disconnection when servicing controls. Wiring errors can causeimproper and dangerous operation.a b c dTravis Industries 4081126 100-01210_000