Installation Manual - Fireplaces
Installation Manual - Fireplaces
Installation Manual - Fireplaces
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Optional Equipment (for qualified installers only) 63<strong>Installation</strong>WARNING:Make sure power to the fireplace has been shut off prior to installation.NOTE:Refer to the wiring diagram on page 62 while making wiring harness connections.1 Remove the concealment cove (see Figure 1).Figure 12 Unscrew the four screws holding the control cover in place (see Figure 2). Carefully remove thecontrol cover (see Figure 3)Figure 2 Figure 33 Unplug the ac adapter from the power harness (see Figure 4). You can leave the ac adapterplugged into the wiring harness.Figure 4© Travis Industries 4081126 100-01210_000