Installation Manual - Fireplaces

Gas Line LocationRight Side Gas Inlet (preferred)Installation (for qualified installers only) 19A 6" (152mm) flex tube and shutoffvalve is included with the fireplace.The shutoff valve accepts a 1/2"MPT.A 3" (76mm) high by 2" (51mm) wide opening islocated behind the gas inlet cover plate. It is 7-3/4"(197mm) behind the front and 1-3/4" (44mm) abovethe base of the fireplace.8-3/4"222mm13-3/4"349mmThe gas inlet is located 2-1/2"(64mm) above the base of thefireplace.You may remove this cover plate to install the gas line. Thecover plate has a 7/8" (.0875mm) diameter hole (coveredwith a push plug) in line with the gas inlet on the gas controlvalve. By rotating the plate 180° the hole may be re-located.You may also secure the plate in a customized location usingthe self-drilling screws.Left Side Gas InletA 3" (76mm) high by 2" (51mm) wide opening islocated behind the gas inlet cover plate. It is 4-3/4"(121mm) behind the front and 1-3/4" (44mm) abovethe base of the fireplace.A 6" (152mm) flex tube and shutoff valve isincluded with the fireplace. You may wish touse a 24" (610mm) flex tube. The shutoff valveaccepts a 1/2" MPT.8-3/4"222mmYou may wish to route the flex line alongthe front edge of the fireplace to conceal it.13-3/4"349mmYou may remove this cover plate to installthe gas line. The cover plate has a 7/8"(0.875mm) diameter hole (covered with apush plug). By rotating the plate 180° thehole may be re-located. You may alsosecure the plate in a customized locationusing the self-drilling screws.© Travis Industries 4081126 100-01210_000