SKF - Rolling Bearings

3 Angular contact ball bearings
Bearing data
Single row angular contact ball bearings
Dimension
standards
Boundary dimensions: ISO 15 and ISO 12044
Tolerances
Normal
For additional
information
(† page 132)
SKF Explorer bearings
P6 dimensional accuracy
P5 running accuracy
Values: ISO 492, († tables 3 to 5, pages 137 to 139)
Contact angle 40°
For a 25° or 30° contact angle, contact SKF.
Internal
clearance
For additional
information
(† page 149)
Preload
For additional
information
(† page 214)
Misalignment
Pairs of universally matchable bearings: CB (normal), G
Availability CA and CC: († matrix 1, page 500)
Values: († table 5, page 488)
Values apply to unmounted bearing sets, arranged back-to-back
or face-to-face under zero measuring load.
Pairs of universally matchable bearings: GA (light preload)
Availability GB and GC: († matrix 1, page 500)
Values: († table 6, page 489)
Values apply to unmounted bearing sets, arranged back-to-back
or face-to-face.
Bearing pairs arranged back-to-back: ≈ 2 minutes of arc
Bearing pairs arranged face-to-face: ≈ 4 minutes of arc
The permissible angular misalignment between the inner and outer rings
depends on the size and internal design of the bearing, the radial internal
clearance in operation and the forces and moments acting on the ...
Friction,
starting torque,
power loss
Defect
frequencies
Frictional moment, starting torque, and power loss can be calculated as
specified under Friction († page 97), or using the tools ...
Defect frequencies can be calculated using the tools ...
486