VersaLASER® (VLS) User Guide VLS2.30, VLS3.50
VersaLASER® (VLS) User Guide VLS2.30, VLS3.50
VersaLASER® (VLS) User Guide VLS2.30, VLS3.50
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operating<br />
Environment<br />
Operating<br />
Temperature<br />
<strong>VLS</strong>2.30 <strong>VLS</strong>3.50<br />
Well-ventilated office (recommended) or clean, light-duty manufacturing<br />
50ºF (10ºC) to 95ºF (35º C) capable<br />
73ºF (22ºC) to 77ºF (25º C) for best performance<br />
Storage Temperature 50ºF (10ºC) to 95ºF (35º C)<br />
Operating Humidity Non-condensing<br />
Electrical Power<br />
Particulate/Odor<br />
Outside Ventilated<br />
Exhaust System<br />
Computer<br />
Requirements<br />
(See the Installation & Set-up<br />
<strong>Guide</strong> for more information)<br />
Software<br />
Requirement<br />
Single Phase 110/240V AC, 10/5 Amp, 50/60 Hz<br />
Grounded (earthed) and stable (surge and spike protected)<br />
150 CFM (cubic feet per minute) @ 6 inches<br />
static pressure (255m3/hr at 1.5kPa)<br />
High-pressure vacuum blower capable of:<br />
250 CFM (cubic feet per minute) @ 6 inches<br />
static pressure (425m3/hr at 1.5kPa)<br />
Windows XP or Windows Vista (32-bit versions only)<br />
2.0 GHz Processor (minimum)<br />
1 GB of RAM (minimum)<br />
40 GB Hard Drive (minimum)<br />
Graphics or CAD based<br />
6
Change language