minimum design & construction standards - Martin County, Florida
minimum design & construction standards - Martin County, Florida
minimum design & construction standards - Martin County, Florida
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The control valve shall be warranted, by the manufacturer, to be free from defects in<br />
material and workmanship for a period of three years from the date of shipment, provided<br />
the valve is installed and used in accordance with published instructions and application<br />
recommendations. Components supplied as part of the pilot control circuitry, but not<br />
manufactured by the valve manufacturer shall convey individual warranties; these<br />
warranties shall never be less than one year from date of assembled valve shipment. The<br />
valve manufacturer shall be capable of providing a complete cavitation profile to <strong>Martin</strong><br />
<strong>County</strong> for each subject valve installation. A factory-trained representative shall provide<br />
start-up and training services to <strong>Martin</strong> <strong>County</strong> at no charge. The control valve<br />
representative must be fully qualified for warranty and non-warranty service and not<br />
subcontract for these services.<br />
Valve shall be inch angle pattern, with 125/150 lb. Flanged ends. The valve shall be AMES<br />
Co., Inc., 4” and larger model 951/651 A-15-43-02-38-SS-2Pg, 3” and smaller model<br />
951/651 AD-15-43-02-38-2Pg as manufactured by AMES Co., Inc., Woodland CA 95776.<br />
Note: Select 951 full ported or 651 reduced port valve based on best match to flow<br />
requirements.<br />
Developer shall submit signed and sealed flow calculations from his Engineer of Record<br />
or Registered Landscape Architect complete with manufacturer’s data for review and<br />
approval by <strong>Martin</strong> <strong>County</strong> Utilities and Solid Waste.<br />
67
Change language