cadera / hip - Active Congress.......

MARTES / TUESDAY
52
high molecular weight polyethylene, in
Merchant RE (ed): Transactions: Twenty-
Third Annual Meeting of the Society for
Biomaterials. Minneapolis, MN, Society
for Biomaterials, 1997, p 427.
66. Furman BD; Ritter MA, Perone JB, et
al.: Effect of resin type and manufacturing
method of UHMWPE oxidation and quality
at long aging and implant times. Tran
Orthopaedic Research Society, 1997.
67. Garino JP: Modern ceramic-on-ceramic
total hip systems in the United States. Clin
Orthop 2000;379:41-47.
68. Gillis AM, Furman BD, Li S: Infl uence of
ultra high molecular weight polyethylene
resin type and manufacturing method on
real time oxidation. Trans Orthop Res Soc
1998; 23:360.
69. Gillis AM, Schmieg JJ, Bhattacharyya
S, Li S: An independent evaluation of
the mechanical, chemical and fracture
properties of UHMWPE crosslinked by
34 different conditions. Trans Society for
Biomaterials 1999:216.
70. Glant TT, Jacobs JJ, Molnar G, et al: Bone
resorption activity of particulate-stimulated
macrophages. J Bone Miner Res 8:1071-
1079, 1993.
71. Goodman SB: The Role of Polymer
Particles in Process of Aseptic Loosening
of Joint Arthroplasties. In Sudarshon
TS, Braza JF (eds): Surface Modifi cation
Technologies V. London, The Institute of
Materials 36-48, 1992.
72. Greer KW, Schmidt MB, Hamilton JV: The
hip simulator wear of gamma-vacuum,
gamma-air, and ethylene oxide sterilized
UHMWPE following a severe oxidative
challenge. Trans Orthop Res Soc
1998;23:52.
73. Grelsamer RP: Letter. J Bone Joint Surg
1991;73A:1112.
74. Grobbelaar CJ, Weber FA, Spirakis A,
et al: Clinical Experience with gamma irradiation
cross-linked polyethylene: A 14
to 20 year follow-up report. SA Bone Joint
& Joint Surg. 1999;9:140-147.
75. Haag M, Adler CP: Malignant fi brous
histiocytoma in association with hip
replacement. J Bone Joint Surg Br.
1989;71:701.
76. Hallab N, Merritt K, Jacobs JJ: Metal
sensitivity in patients with orthopaedic implants.
J Bone Joint Surg 2001;83A:428-
435.
77. Hasegawa M, Sudo A, Hirata H, Uchida A:
Ceramic acetabular liner fracture in total
hip arthroplasty with a ceramic sandwich
cup. J Arthroplasty, 18(5):658-61, 2003.
78. Hastings RS, Huston DE, Reber EW,
KiMaio WG: Knee wear testing of a radiation
cross-linked and remelted UHMWPE,
in LaBerge M, Agrawal C, Mauli CM
(eds): Transactions: Twenty-Fifth annual
Meeting of the Society for Biomaterials.
Minneapolis, MN, Society for Biomaterials,
1999, p 328.
79. Heath JC, Freeman MA, Swanson SA:
Carcinogenic properties of wear particles
from prostheses made in cobalt-chromium
alloy. Lancet. 1971;1:564-566.
80. Heck DA, Partridge CM, Reuben JD, et
al: Prosthetic component failures in hip
arthroplasty Surgery. J Arthropl 10:575-
580, 1995
81. Heimke G, Berg E, Chillag K: Letter. J
Bone Joint Surg 1991;73A:1112.
82. Heisel C, Silva M, Schmalzried TP: Bearing
surface options for total hip replacement
in young patients. Instr Course Lect.,
53:49-65, 2004
83. Herman JH, Sowder WG, Anderson D,
Appel AM, Hopson CN: Polymethyl-methacrylate-induced
release of bone resorbing
factors. J Bone Joint Surg 71A:1530-
1541, 1989.
84. Heros HJ, Willmann G: Ceramics in Total
Hip Arthroplasty: History, Mechanical
Properties, Clinical Results, and Current
Manufacturing State of the Art. Seminars
in Arthroplasty, 1998: 114-122.
85. Howie D, Vernon-Roberts B, Oakshott R,
Manthey R: A rat model of resorption of
bone at the cement bone interface in the
presence of polyethylene wear particles. J
Bone Joint Surg 70A:257-263, 1998.