cadera / hip - Active Congress.......

MARTES / TUESDAY
58
placement. Clin Orthop 95:26-33, 1973.
128. McKee GK: Development of total prosthetic
replacement for the hip. Clin Orthop
72:85-103, 1970.
129. McKee GK: Total hip replacement.
Present and future. Biomaterials 3; 130-
135, 1982.
130. McKellop H, Lu B, Benya P: Friction,
lubrication and wear of cobalt-chromium,
alumina and zirconia hip prostheses compared
on a joint simulator. Trans Orthop
Res Soc 1992; 17:402.
131. McKellop H, Shen F-W, Di Maio W, Lancaster
JG: Wear of gamma-cross-linked
polyethylene acetabular cups against
roughened femoral balls. Clin Orthop
1999;369:73-82
132. McKellop H, Shen FW, Lu B, Campbell P,
Salovey R: Development of an extremely
wear resistant ultra high molecular weight
polyethylene for total hip replacements. J
Orthp Res 1999;17:157-167.
133. Mckellop H, Shen FW, Lu B, Campbell
P, Salovey R: Effect of Sterilization method
and other modifi cations on the wear resistance
of acetabular cups made of ultra
high molecular weight polyethylene. J
Bone Joint Surg 2000;82A:1708-1724.
134. McKellop HA, Rostlund TV: The wear behavior
of ion-implanted Ti-6A1-4V against
UHMW polyethylene. J Biomed Mater Res
1990;24:1413-1425.
135. McKellop HA, The J Vernon Luck Center
for Orthopaedic Research, Orthopaedic
Hospital/UCLA: Crosslinked Polyethylenes:
Similarities and Defferences. Massachusetts
General Hospital & Harvard
Medical School 2000.
136. McKellop HA: Bearing surfaces in total
hip replacements: state of the art and
future developments. Instr Course Lect.
50:165-179, 2001.
137. Medley JB, Chan FW, Krygier JJ, Bobyn
JD: Comparison of alloys and designs
in a hip simulator study of metal-metal
implants. Clin Orthop 329(Suppl): 148-
159, 1996.
138. Medley JB, Krygier JJ, Bobyn JD, Chan
GW, Tanzer M: Metal-metal bearing surfaces
in the hip: investigation of factors
infl uencing wear. Trans Orthop Res Soc
20: 765, 1995.
139. Mishra AK, Davidson JA, Poggie RA,
Kovacs P, FitsGerald TJ: Mechanical and
tribological properties and biocompatibility
of diffusion hardened T-13Nb-13Zr: A
new titanium alloy for surgical implants,
in Brown SA, Lemons JE (eds): Medical
Application of Titanium and Its Alloys: The
Material and Biological Issue. West Conshohocken,
PA, ASTM, 1996, pp 96-112.
140. Mittelmeier H: Report on the fi rst decennium
of clinical experience with a cementless
ceramic total hip replacement. Acta
Orthop Belg 51:367, 1985.
141. Mittelmeier TH, Walter A: The infl uence
of prosthesis design on wear and loosening
phenomena. CRC Critical Reviews in
Biocompatibility 3:319, 1987.
142. Morris JB, Nicholson OR: Total prosthetic
replacement of the hip joint in Auckland.
Clin Orthop72:33-35, 1970.
143. Muratoglu OK, Bragdon CR, O’Connor
DC et al: The effect of temperature on
radiation cross-linking of UHMPWE for
use in total hip arthroplasty. Trans Orthop
Res Soc 2000;25:547.
144. Muratoglu OK, Bragdon CR, O’Connor
DO, et al: The comparison of the wear
behavior of four different types of crosslinked
acetabular components. Trans
Orthop Res Soc 2000;25:566.
145. Muratoglu OK, Bragdon CR, O’Connor
DO, et al: Unifi ed wear model for highly
cross-linked ultra high molecular weight
polyethylenes (UHMWPE). Biomaterials
1999;20:1463-1470.
146. Muratoglu OK, Bragdon CR, O’connor
DO, Justy M, Harris WH: A Novel Method
of Cross-Linking UHMWPE to improve
wear, reduce oxidation, and retain mechanical
properties. J. Arthroplasty, 2001;
16, 149-160.
147. Murray MP, Brewer BJ, Gore DR, Zuege
RC: Kinesiology after McKee-Farrar total
hip replacement. A two-year follow up of