Outgoing calls - Sonim Technologies

Getting started
The device with a fully-charged battery can remain in the
standby mode for a duration of 200 hours.
Standby screen
Operations in standby mode
The following can be accessed from the home screen when
the phone is in standby mode or when the phone is not in
use.
Press To access
Up arrow Call list
Down arrow Phone book list
Right arrow Write Message
Left arrow WAP options
1.GPRS connectivity
2.Signal strength indicator
3.Display icons
4.Battery charge indicator
5.Service provider
6.Local time
7.RSK command
8.LSK command
12
Press To access
Menu key Main menu
Left Selection key Main menu
Right Selection key Phone book
Call accept/Send key Outgoing calls list
�
The four functions that are performed using
the arrow keys are set as factory defaults,
however they can be changed. You can also
configure new shortcuts. For more information
on shortcuts refer page 21.
Basic settings
When you have switched on your phone the name of the
service provider is displayed.
Security settings
1. To prevent unauthorised use of your phone, you can
set a PIN code. In order to change the PIN , the
default PIN 0000 should be activated first .Once this
PIN is activated , then only the PIN can be changed to
the user’s chosen PIN.
2. Select Menu > Settings > Security settings > PIN
code > On > OK. After this is set, every time you
power on the phone, you will be requested to enter
the PIN. If the PIN code is wrong you cannot access
the phone.