ENGLISH - Geha GmbH

� Back and bottom view
Security lock
Attach the commercial shackle lock,
manufactured by Kensington, to
protect your projector. Compatible
with the Kensington MicroSaver
Security System.
Auto cleaning filter (ACF)
compartment
(page 51)
LAN
Connect a LAN cable for network
connection.
DVI-D IN
Connect a DVI-D cable
(Single).
SERIAL
See “Serial terminal” on page 55.
REMOTE
See “REMOTE terminal” on
page 57.
Front leg adjusters
Screw up/down to adjust the
projection angle. (page 18)
COMPUTER1 IN
Connect an RGB or component signal
cable.
COMPUTER2 IN/1 OUT
Connect an RGB or component signal
cable. Selectable for input and output by
menu operation.
COMPUTER AUDIO IN
Connect audio cables for inputting
audio signals corresponding to
COMPUTER1 IN, COMPUTER2
IN/1 OUT and/or DVI-D IN
terminals.
About Your Projector
Lamp unit compartment
(page 50)
Air exhaust port
Heated air comes out of this
opening.
MAIN POWER
Switch the projector on/off.
(page 25)
Burglar hook port
Attach a commercial burglar
prevention cable.
AC IN
Connect the mains lead to supply
electronic power to the projector.
(page 23)
AUDIO IN
Connect audio cables for inputting
audio signal.
S-VIDEO IN
Connect a S-VIDEO signal cable.
VIDEO IN
Connect an RCA composite video
cable.
VARIABLE AUDIO OUT
Connect an audio cable for
outputting audio signals to the
connected equipment.
NOTE:
• Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause damage or injury.
• When a cable is connected to the VARIABLE AUDIO OUT, the built-in speaker will be disabled.
ENGLISH - 15
Preparation