You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Getting Started<br />
Setting up<br />
Projection method<br />
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector,<br />
See “INSTALLATION” on page 44.<br />
� Setting on a desk/floor and<br />
projecting from front<br />
You can screw up/down the front leg adjusters to control the angle of the projector for adjusting the throwing angle.<br />
See “Positioning the image” on page 26.<br />
<strong>ENGLISH</strong> - 18<br />
� Setting on a desk/floor and<br />
projecting from rear<br />
INSTALLATION: FRONT/DESK INSTALLATION: REAR/DESK<br />
� Mounting on the ceiling and<br />
projecting from front<br />
� Mounting on the ceiling and<br />
projecting from rear<br />
INSTALLATION: FRONT/CEILING INSTALLATION: REAR/CEILING<br />
NOTE:<br />
• A translucent screen is required for rear projection.<br />
• When mounting the projector on the ceiling, the optional ceiling mount bracket (ET-PKF100H, ET-PKF100S) is required.<br />
• See “Ceiling mount bracket safeguards” on page 58.<br />
Front leg adjusters and throwing angle<br />
NOTE:<br />
• Heated air comes out of the air exhaust port. Do not touch the air exhaust port directly.<br />
• If keystone distortion occurs, see “KEYSTONE” on page 37.<br />
• Screw up the adjuster legs, and an audible click will be heard as the limit.