Operating instructions - FerrariDatabase.com

Navigational mode
The list of destinations
The list of destinations displays all the
destinations available for quick selection
line-by-line. Each line is split into two
boxes. Each list box is depicted as a key.
The destination is named on the righthand
key and its characteristics shown in
the left-hand icon.
Note:
The last 50 destinations are saved in the
destinations memory. Once the memory's
capacity has been fully used up, the oldest
destination is automatically deleted
whenever a new one is entered. Important
destinations can however be protected.
34
Icons used
The following icons are used in the list
of destinations.
Icon Meaning
6026
This destination is a standard
destination without any special
features.
6025
6038
This destination is protected.
Once the destination memory
is full, this destination is
not automatically deleted. If
required, this can be set manually.
This destination is the current
home address.
Operating rapid access
Starting using an existing destination
Destinations already in the destinations
memory are listed in the list of destinations.
� Press the button with the desired destination
to start route calculation.
The calculation is started. Once the calculation
is complete, the map display appears
and directions to the destination
begin.
Scrolling in the destinations memory
You can use the 7006
keys to scroll
through the list display in the direction
indicated on the arrow.
The current list page and the total number
of its contents appear between the
keys.