Glanded Pumps - THERMO-ECO-ENGINEERING úvod

Pump Management Systems Wilo-Control
Pump Control
Series description Wilo-IR-Monitor
Series Main menu
descrip- The main menu of the IR-Monitor is divided into 6 function menus:
tion Wilo-
IR-Monitor Menu 1: “Communication”
This menu initiates the automatic linkup between
the IR-Monitor and the pump.
Selective activation of individual pumps within a set
of pumps 1000 is also possible here.
Menu 2: “Display”
Here it is possible to read system data, e.g. actual
electrical and hydraulic values, operating status,
operating mode, fault reports.
For correct interpretation, the display always distinguishes
clearly between “Single-” and “Twin-head
pump”.
Menu 3: “Operate”
In this menu, data can be both displayed (current
setpoint value) and changed, e.g. control mode,
setpoint value, pump ON / OFF, disabling the manual
operating level at the pump (pump ON / OFF,
Ext. Aus and SSM remaining active).
Menu 4: “Statistics”
So that operating periods can be analysed, this
menu offers clearly definable histograms of hydraulic
performance (volumetric flow Q), thus giving an
appreciation of the system load conditions over
a definable operating period. It also records hoursrun
and operating data.
Menu 5: “Service”
In the service menu the user is given the open of
fault diagnosis, fault statistics, function-testing the
pump, the IR-Monitor and the serial digital interface,
as well as direction-of-rotation check and
frequency measurement of the rotating field.
The latter two checks can also be conducted with
all conventional pumps without IR interface.
Menu 6: “Adjust”
Language selection, contrast and time-out settings,
changing and activating the personal password
are available to adapt the IR-Monitor to suit
individual requirements.
206 Subject to change without prior notice 09/2006 WILO AG