Filser Electronic G
Filser Electronic G
Filser Electronic G
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• GRAPHIC<br />
• NMEA<br />
• PC<br />
• POLAR<br />
• LOAD<br />
• TE COMP.<br />
• AUDIO<br />
• INPUT<br />
• LCD INDICATOR<br />
• PAGE 1<br />
• PAGE 3<br />
Editing and adding more pilots „by hand“ is possible by pressing ENTER:<br />
page 18<br />
LX5000 March 2002<br />
The function INSERT allows adding of more pilots (Up to 30). The message Active (upper right corner) indicates that<br />
specific settings of th shown pilot are active (means that this pilot has been chosen in the startup procedure).<br />
Important!<br />
Having entered a new pilot switch the LX5000 off and then on again and chose the desired pilot.<br />
A new entry can also be performed by entering that pilot into the FLIGHT INFO and copying to the pilot list.<br />
3.1.2.7 NMEA<br />
LX5000 delivers position data in the NMEA-format to other navigation devices in the cockpit if necessary.<br />
All NMEA sentences are not active in default settings that means the pilot has to activate them if necessary. Normally<br />
GGA, RMC, and RMB are used. The pilots using WinPilot should activate LXWP_ also. Please see manual of your<br />
external device for information about the needed protocolls.<br />
The data is available as Tx line on 9P sub D connector marked RS 232, see wiring.<br />
3.1.2.8 PC<br />
The speed of data transfer between LX5000 and other devices (PC, LX 20 or Colibri) can be adjusted in this menu. It is<br />
very important that both devices have the same communication speed.<br />
The new Windows PC program Lxe is able to adapt the communication speed automatically. The old DOS programs<br />
(LXGPS and LXFAI) are not able to do that.