Filser Electronic G

More documents

Recommendations

Info

5 Installation page 45 LX5000 March 2002 The LX5000 main unit needs one standrad 80-mm cut-out. Each Vario indicator needs one standrd 57 mm cut-out. Three pressure connectors are on the rear side of the instrument. A label on the rear side shows their functions. • Ptot = Pitot, Total pressure • TE = TE probe • Pst = Static Using electronic compensation: • TE/Pst Static • Pst Static • Ptot Pitot Using TE tube • TE/Pst TE tube • Pst Static • Ptot Pitot IMPORTANT! Having changed Ptot and Static, there will be no integrator (average climbing) indication during the flight The unit is connected to the power via 25 SUB D connector. There is no fuse in the instrument so it is VERY IMPORTANT to use an external fuse (2A). For power supply extension use min. 0.5 mm² cables. Installation of the LX5000 • Prepare the cutouts in the instrument pannel according to the drilling plans. • Remove the inscripted covers from the four main selectors on the LX5000. • While holding the selectors, open the screws which are now visible with a screwdriver. Now the selectors may be removed. • Remove the four special type screws. • Now position the LX5000 in the cutout in the instrument pannel. • Fasten the LX5000 with the special screws. • Now the turn knobs and the covers may be fastened again.
Dimensions for mounting: page 46 LX5000 March 2002
Page 1 and 2: LX5000 V 9.0 Variometer and GPS-Nav
Page 3 and 4: page 2 LX5000 March 2002 3.2.5 TSK
Page 5 and 6: 2.2 Rotary switches and keys (butto
Page 7 and 8: 3 Operation modes page 6 LX5000 Mar
Page 9 and 10: Before leaving the FLIGHT INFO menu
Page 11 and 12: 3.1.1.4 DISPLAY page 10 LX5000 Marc
Page 13 and 14: page 12 LX5000 March 2002 At first,
Page 15 and 16: HDG: SYMMETRICAL A21: AUTO A1: 45 0
Page 17 and 18: 3.1.2.5 GRAPHIC page 16 LX5000 Marc
Page 19 and 20: • GRAPHIC • NMEA • PC • POL
Page 21 and 22: page 20 LX5000 March 2002 TE settin
Page 23 and 24: page 22 LX5000 March 2002 Each indi
Page 25 and 26: Rotate the UP/DOWN-selector and bot
Page 27 and 28: page 26 LX5000 March 2002 The glide
Page 29 and 30: page 28 LX5000 March 2002 GSPEED DI
Page 31 and 32: 3.2.4.5 TEAM The same as described
Page 33 and 34: page 32 LX5000 March 2002 Please no
Page 35 and 36: page 34 LX5000 March 2002 3.2.6 Sta
Page 37 and 38: page 36 LX5000 March 2002 The zoom
Page 39 and 40: 3.3.3 Speed command page 38 LX5000
Page 41 and 42: page 40 LX5000 March 2002 If a task
Page 43 and 44: 3.4.4.5 TSK END page 42 LX5000 Marc
Page 45: 4.2 Communication LX5000 - LX 20, C
Page 49 and 50: 5.2 Tree structure Diagram ⇔ MODE
Page 51 and 52: 7 Options 7.1 LX5000 Compass Module
Page 53 and 54: 1. Orientate the aircraft again to
Page 55: 7.2.3 Electonic connection Seite 54

Filser Electronic G

Create successful ePaper yourself

Delete template?

Save as template?