Filser Electronic G
Filser Electronic G
Filser Electronic G
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.2 Rotary switches and keys (buttons)<br />
The following control elements are mounted on the main unit<br />
• Four rotary switches (selectors)<br />
• Five keys (push buttons)<br />
The LCD-Vario is designed as a slave unit, which means it has no control switches and keys.<br />
ON, start key ESC /OFF key ENTER key<br />
Audio volume<br />
ZOOM selector<br />
MC input key<br />
page 4<br />
LX5000 March 2002<br />
MODE selector<br />
Display<br />
UP/DOWN selector<br />
EVENT key<br />
2.2.1 On/Start key<br />
A short press on ON/Start key will switch the instrument ON. To switch the instrument off hold ESC/OFF key for a few<br />
seconds and the instrument will be switched off. To switch the instrument off during the flight it needs a confirmation<br />
from the pilot, so the LX5000 cannot be switched off by mistake.<br />
IMPORTANT!<br />
After having a short power brake during flight and the instrument will be off for a few seconds, it will not produce two<br />
flights.<br />
During flight the key is used to start the task, to see more characters of airport names and, in the edit menu, to go one<br />
step back if e.g. an error has been made (see paragraph APT).<br />
2.2.2 Mode selector (rotary switch)<br />
The mode selector is used to change modes of operation. This switch has the highest priority in the system. Whenever<br />
it is activated a mode changeover will happen.