QlikView Reference Manual.pdf - QlikCommunity - QlikView

More documents

Recommendations

Info

7 Starting QlikView Starting QlikView Start QlikView from the Start menu, Programs or double-clicking on a QlikView document. To start QlikView from the command line, use the parameters described in the following section. 7.1 Command Line Syntax The QlikView command line invocation can be described by the following syntax (for a description of the syntax notation used, see Backus-Naur Formalism (page 905)): [ path ]Qv.exe[ { switch } documentfile ] The path is the path to the file, either absolute, or relative to the current directory. documentfile::= [ path ] documentfilename documentfilename is the name of the document file. switch is used to mark different options: /r Reload switch. The document will be opened and the script reloaded. Thereafter the document will be saved, and QlikView will close itself. /rp The same as above, but with a partial reload. /l Load new data. The document will be opened and the script reloaded. The document will not be saved and QlikView will remain open. /lp The same as above, but with a partial reload. /v If this switch is immediately followed by a variable name and an assignment, the variable will obtain the assigned value before the script execution starts. /nodata Opens the document without variables, table and field data. This feature is also available for previously opened documents on The Start Page (page 39). /NoSecurity Overrides QlikView security measures against hostile macros and scripts embedded in QlikView documents. No warning dialogs prompting the user to accept potentially harmful code will be shown. Use this switch with caution and only with well-known documents. Example: qv.exe /r/vMyvar=123 abc.qvw Note! In order to avoid error messages to appear when executing scripts in batch mode, always set the script variable errormode to 0 in the script (see Error Variables (page 278)) 38
7.2 The Start Page The Getting Started page of the QlikView start page Part 3 Navigation and Basics The start page contains several tabs. The number of tabs and the contents of some of them may vary over time as they contain web content. The following pages will exist at all times. Getting started Contains information and links that can help explore the wealth of possibilities in QlikView. This includes direct links to downloading the Tutorial and to the Getting Started Wizard as well as links to selected resources at www.qliktech.com. 39
Page 1 and 2: Reference Manual Version 11.0 for M
Page 3 and 4: Content Part 1 Introduction Content
Page 5 and 6: Contents 14.10 Search 113 14.11 Adv
Page 7 and 8: Contents 29.9 Inherited Access Rest
Page 9 and 10: Contents 39.6 Caption 538 40 Text O
Page 11 and 12: Contents 51.11 Colors 643 51.12 Num
Page 13 and 14: Contents 58.5 Expressions 696 58.6
Page 15 and 16: Contents 73 Calculated Formulas 851
Page 17: Part 1 Introduction Part 1 Introduc
Page 20 and 21: Mouse Conventions l The description
Page 22 and 23: The most important difference betwe
Page 24 and 25: Alert E-mail to Document Administra
Page 27: 3 Compatibility Issues for Earlier
Page 31 and 32: Part 2 Installation Part 2 Installa
Page 33 and 34: 5.3 Serialization Part 2 Installati
Page 35 and 36: 6 OLE DB and ODBC 6.1 OLE DB QlikVi
Page 37: Part 3 Navigation and Basics Part 3
Page 41 and 42: Part 3 Navigation and Basics QlikVi
Page 43 and 44: QlikView Publisher Part 3 Navigatio
Page 45 and 46: 8 Getting Started Wizard The Gettin
Page 47 and 48: Step 3 - Save File The Save As dial
Page 49: Step 6 - Add Expression Step 6 of t
Page 52 and 53: l TX.xml l LA.xml l SL.xml l SO.xml
Page 54 and 55: Save Saves the present configuratio
Page 56 and 57: Export Export Contents... This alte
Page 58 and 59: Advanced Search Opens the Advanced
Page 60 and 61: Promote Sheet Moves the (tab of the
Page 62 and 63: More... Opens the Bookmarks dialog,
Page 64 and 65: Document The name of the .qvw docum
Page 67 and 68: 11 Toolbars and Status Bar 11.1 Too
Page 69 and 70: 11.3 Navigation Toolbar The QlikVie
Page 71 and 72: Format Painter This button makes it
Page 73 and 74: New Creates a new toolbar. Rename R
Page 75: 11.8 Status Bar Below the sheet, th
Page 78 and 79: Shift Inhibits Macros This setting
Page 80 and 81: Search Settings In this group setti
Page 82 and 83: Save AutoRecover Info Here rules fo
Page 84 and 85: Expression in Chart Normal Text Tex
Page 86 and 87: Design Grid Settings Snap Step (mm)
Page 88 and 89:
Click in Chart background Clears Se
Page 90 and 91:
Data Area Only If this option is ch
Page 92 and 93:
12.8 User Preferences: Printing Use
Page 94 and 95:
User ID The user ID used for authen
Page 96 and 97:
Modify... When a folder resource is
Page 99 and 100:
13 Exporting and Printing 13.1 Prin
Page 101 and 102:
Margins In the Margins group you ca
Page 103 and 104:
13.4 Date & Time The Date & Time di
Page 105 and 106:
Quoting In this group, the quoting
Page 107 and 108:
14 Logic and Selections 14.1 Single
Page 109 and 110:
Logical Behavior The logical behavi
Page 111 and 112:
To unlock a previously set lock, op
Page 113 and 114:
Block Charts In block charts indivi
Page 115 and 116:
any characters at all (for Normal S
Page 117 and 118:
Aggregation In this drop-down it is
Page 119 and 120:
Note that Tab2 shown here is a tabl
Page 121 and 122:
This means that the total amount so
Page 123 and 124:
Features in Alternate States The fo
Page 125 and 126:
15 Bookmarks 15.1 Bookmark Types Th
Page 127 and 128:
Create as a server bookmark Share B
Page 129 and 130:
Edit Info Here it is possible to ed
Page 131 and 132:
when used in QlikView 11. Bookmarks
Page 133 and 134:
16 Reports Printing a report often
Page 135 and 136:
Available Reports Document Reports
Page 137 and 138:
Edit Menu Copy Copies the currently
Page 139 and 140:
New Text... Creates a new text obje
Page 141 and 142:
Align Right Only available when two
Page 143 and 144:
The Margins Tab Report Settings, Ma
Page 145 and 146:
General Page Settings, General tab
Page 147 and 148:
Report Editor: Item Settings Dialog
Page 149 and 150:
17 Alerts 17.1 Creating Alerts The
Page 151 and 152:
17.4 The Alerts Dialog The Alerts d
Page 153 and 154:
Events The Events group is used for
Page 155 and 156:
The first start page of the Alert W
Page 157 and 158:
In this step you define the alert c
Page 159 and 160:
Trigger Level The firing of automat
Page 161 and 162:
18 Variable Overview The Variable O
Page 163 and 164:
19 Expression Overview The Expressi
Page 165 and 166:
20 Internal Files 20.1 File Referen
Page 167 and 168:
Part 4 Script Part 4 Script 167
Page 169 and 170:
22 Variables and Fields This chapte
Page 171 and 172:
=0 no change. There are also Automa
Page 173 and 174:
23 Edit Script Dialog The Edit Scri
Page 175 and 176:
Edit Menu Undo Undoes the latest ch
Page 177 and 178:
Syntax Check Checks the syntax of y
Page 179 and 180:
Function Name This drop-down list c
Page 181 and 182:
Down Mark this radio button to sear
Page 183 and 184:
Click on Field in Table Highlights
Page 185 and 186:
Generic Data Sources Select Data So
Page 187 and 188:
23.7 Create Select Statement The Cr
Page 189 and 190:
Script The Script tab shows the scr
Page 191 and 192:
23.9 Open Internet Files or Open Ql
Page 193 and 194:
Click OK to close the dialog and ge
Page 195 and 196:
File Wizard: Source File Wizard, So
Page 197 and 198:
File Wizard, Type This page contain
Page 199 and 200:
Analyze Fix Positions Clear Fix Pos
Page 201 and 202:
Analyze Fix Positions Analyzes and
Page 203 and 204:
Columns and rows can both be remove
Page 205 and 206:
In an HTML table more information t
Page 207 and 208:
Rotate File Wizard: Transform, Rota
Page 209 and 210:
The Specify Row Condition dialog Th
Page 211 and 212:
Cells and Columns Source Column Set
Page 213 and 214:
Simple Choose what Field(s) should
Page 215 and 216:
Belongs To Parameters File Wizard:
Page 217 and 218:
Debug This group contains settings
Page 219 and 220:
24 Script Syntax In the script, the
Page 221 and 222:
Replace page 260 Right page 259 Sam
Page 223 and 224:
During partial reload, data is load
Page 225 and 226:
Bundle info Load * from flagoecd.cs
Page 227 and 228:
tablelist := (table{,table}) mapnam
Page 229 and 230:
64-bit 32-bit connect64 uses a 64-b
Page 231 and 232:
Example: disconnect; Back to Script
Page 233 and 234:
Exit Script The exit script control
Page 235 and 236:
var is a script variable name which
Page 237 and 238:
All nodes without a parent id or wi
Page 239 and 240:
if x>0 then load * from pos.csv; el
Page 241 and 242:
Back to Script Statements and Keywo
Page 243 and 244:
08:00 4 Start of shift 2 D 07:23 11
Page 245 and 246:
1 xx 4 yy QVTable QVTable: select *
Page 247 and 248:
field ::= ( fieldref | expression )
Page 249 and 250:
Selecting certain records Load dist
Page 251 and 252:
Table Format txt In a delimited tex
Page 253 and 254:
XML (XML Files Only) xmlsax xmlsimp
Page 255 and 256:
NullAsValue By default, QlikView co
Page 257 and 258:
*fieldlist is a comma separated lis
Page 259 and 260:
Right The Join (page 243) and Keep
Page 261 and 262:
During partial reload, any QlikView
Page 263 and 264:
join is a qualifier stating if seve
Page 265 and 266:
SQLColumns The sqlcolumns statement
Page 267 and 268:
where: string is an arbitrary text.
Page 269 and 270:
switch expression { case valuelist
Page 271 and 272:
Unmap The unmap statement disables
Page 273 and 274:
There are three separate domains fo
Page 275 and 276:
QvWorkRoot Returns the root directo
Page 277 and 278:
Example: Set MoneyThousandSep=',';
Page 279 and 280:
3 Syntax Error 4 General ODBC Error
Page 281 and 282:
The parameter $0 returns the number
Page 283 and 284:
25 Script Expressions Expressions c
Page 285 and 286:
Relational Operators All relational
Page 287 and 288:
min( expression[, rank] ) Returns t
Page 289 and 290:
Load Month, count(Sales) as NumberO
Page 291 and 292:
Load Month, stdev(Sales) as SalesSt
Page 293 and 294:
for a series of coordinates represe
Page 295 and 296:
eturns the aggregated net present v
Page 297 and 298:
Example: Load Year, ttest_upper(Gro
Page 299 and 300:
eturns the aggregated student's t-t
Page 301 and 302:
TTest1w_upper (weight, value [, sig
Page 303 and 304:
Load Year, ztestw_conf(Weight,Value
Page 305 and 306:
frac(x) floor( 1.1 , 1 , 0.5 ) retu
Page 307 and 308:
fact( 5 ) returns 120 ( 1 * 2 * 3 *
Page 309 and 310:
angemax(expr1 [ , expr2, ... exprN
Page 311 and 312:
angemode ('a',4,'a',4) returns NULL
Page 313 and 314:
log10(x ) The 10-logarithm (base 10
Page 315 and 316:
eturns the probability for the Stud
Page 317 and 318:
pv(rate, nper, pmt [ ,fv [ , type ]
Page 319 and 320:
RowNo( ) Returns an integer for the
Page 321 and 322:
The ASCII character corresponding t
Page 323 and 324:
In its three-parameter version, thi
Page 325 and 326:
Example: Returns the number of time
Page 327 and 328:
it possible to refer also to fields
Page 329 and 330:
Example: match( M, 'Jan','Feb','Mar
Page 331 and 332:
getcurrentselections() getcurrentse
Page 333 and 334:
This function can be used in the sc
Page 335 and 336:
C:\UserFiles\abc.txt Will return 't
Page 337 and 338:
Returns the name of the field with
Page 339 and 340:
day(date) Day. Returns an integer r
Page 341 and 342:
makeweekdate(1999,6) returns 1999-0
Page 343 and 344:
inyear ( '2005-01-25', '2006-01-01'
Page 345 and 346:
inweek ( '2006-01-12', '2006-01-20'
Page 347 and 348:
yearend ( '2001-10-19', 0, 4 ) retu
Page 349 and 350:
Examples: script. N must be (1), 2,
Page 351 and 352:
lunarweekstart ( '2006-01-12' ) ret
Page 353 and 354:
Examples: Returns the latest starti
Page 355 and 356:
Example: Set MoneyThousandSep=',';
Page 357 and 358:
Setting 1 Setting 2 String 35,648.0
Page 359 and 360:
time( A ) where A=35648.375 returns
Page 361 and 362:
Setting 1 Setting 2 String 97-08-06
Page 363 and 364:
Returns the RGB color representatio
Page 365 and 366:
26 Data Structures 26.1 Data Loadin
Page 367 and 368:
26.5 Associations between Logical T
Page 369 and 370:
26.6 Renaming Fields Sometimes it i
Page 371 and 372:
exists in the left (right) table. A
Page 373 and 374:
QVTable: Select * from Table1; left
Page 375 and 376:
27 Evaluating the Loaded Data 27.1
Page 377 and 378:
A 1993 65 56 22 79 12 56 A 1994 45
Page 379 and 380:
l The intervals are always closed,
Page 381 and 382:
to transform an adjacent nodes tabl
Page 383 and 384:
If the relations are between field
Page 385 and 386:
names. This is the reason why we ha
Page 387 and 388:
The entire script should have the f
Page 389 and 390:
Associating/Selecting NULL Values f
Page 391 and 392:
A =NULL returns FALSE (0) A > NULL
Page 393 and 394:
28 QVD Files A QVD (QlikView Data)
Page 395 and 396:
The complexity of the actual soluti
Page 397 and 398:
Script Example: QV_Table: SQL SELEC
Page 399 and 400:
Script Example: Let ThisExecTime =
Page 401 and 402:
29 Security A security mechanism in
Page 403 and 404:
NTNAME A field that should contain
Page 405 and 406:
Example: section access; load * inl
Page 407 and 408:
Part 5 Sheet and Sheet Objects Part
Page 409 and 410:
Part 5 Sheet and Sheet Objects Help
Page 411 and 412:
Part 5 Sheet and Sheet Objects Tabr
Page 413 and 414:
Any color settings can be previewed
Page 415 and 416:
Initial Data Reduction Based on Sec
Page 417 and 418:
Type Clarifies the object type. Cap
Page 419 and 420:
Client Refresh Initiation Mode Part
Page 421 and 422:
30.6 Input Box Properties: Constrai
Page 423 and 424:
Part 5 Sheet and Sheet Objects List
Page 425 and 426:
30.8 Document Properties: Triggers
Page 427 and 428:
Variable Event Triggers Part 5 Shee
Page 429 and 430:
Part 5 Sheet and Sheet Objects Add
Page 431 and 432:
Part 5 Sheet and Sheet Objects Comm
Page 433 and 434:
The Reset button sort order is sort
Page 435 and 436:
The Default from Input button sets
Page 437 and 438:
30.15 Font The Font dialog Here the
Page 439 and 440:
Part 5 Sheet and Sheet Objects Stre
Page 441 and 442:
Part 5 Sheet and Sheet Objects Scro
Page 443 and 444:
Part 5 Sheet and Sheet Objects Show
Page 445 and 446:
31 The Sheet A QlikView document ca
Page 447 and 448:
31.5 Sheet Properties: General Shee
Page 449 and 450:
31.6 Select Fields/Sheet Properties
Page 451 and 452:
Layer The layers are set on the She
Page 453 and 454:
QlikView Server. Please study the s
Page 455 and 456:
32 Sheet Objects The following type
Page 457 and 458:
33 List Box The list box is the mos
Page 459 and 460:
Print Possible... Opens the Print:
Page 461 and 462:
Field Select a field from the list.
Page 463 and 464:
Default Search Mode Specifies the i
Page 465 and 466:
Line Style Only applicable on line,
Page 467 and 468:
Representation The following altern
Page 469 and 470:
Only available when the Mini Charts
Page 471 and 472:
33.5 List Box Properties: Presentat
Page 473 and 474:
Color If this setting is enabled th
Page 475 and 476:
33.7 Font The Font dialog Here the
Page 477 and 478:
Stretch Image If the Image border t
Page 479 and 480:
Scroll Style Sets the scroll bar st
Page 481 and 482:
Caption and Border Properties The C
Page 483 and 484:
34 Statistics Box The statistics bo
Page 485 and 486:
Remove Removes the sheet object. 34
Page 487 and 488:
Sample consists of all not excluded
Page 489 and 490:
35 Multi Box Due to its unique opti
Page 491 and 492:
Linked Objects Opens a menu with th
Page 493 and 494:
Sort by Applicability When this opt
Page 495 and 496:
Frequency Show Toggles the status f
Page 497 and 498:
Image Options Representation The fo
Page 499 and 500:
This property page provides formatt
Page 501 and 502:
36 Table Box The table box is a she
Page 503 and 504:
Print as PDF... Opens the Print dia
Page 505 and 506:
Sample Text This is the preview cel
Page 507 and 508:
Load Order Sorts the fields in the
Page 509 and 510:
Alignment The default alignment of
Page 511 and 512:
Cell Borders Transparency Sets how
Page 513 and 514:
37 Current Selections Box In the cu
Page 515 and 516:
Restore Restores a minimized or max
Page 517 and 518:
37.5 Caption On the Caption tab you
Page 519 and 520:
38 Input Box The input box is a she
Page 521 and 522:
Minimize Iconizes the object. Click
Page 523 and 524:
38.4 Input Box Properties: Presenta
Page 525 and 526:
Custom Input values will be checked
Page 527 and 528:
38.7 Font On the Font tab you can c
Page 529 and 530:
39 Button Buttons can be created an
Page 531 and 532:
Text Entering a text in the text fi
Page 533 and 534:
The following actions can be added
Page 535 and 536:
External Export Exports a table con
Page 537 and 538:
Export to In this group you can cho
Page 539 and 540:
40 Text Object Text objects are use
Page 541 and 542:
Text Object Properties, General For
Page 543 and 544:
Background In the Background group
Page 545 and 546:
41 Line/Arrow Object Line/arrow obj
Page 547 and 548:
In the Background group you may def
Page 549 and 550:
42 Slider/Calendar Object Slider/Ca
Page 551 and 552:
42.3 Slider/Calendar Object Propert
Page 553 and 554:
42.4 Slider/Calendar Object Propert
Page 555 and 556:
42.6 Sort On the Sort tab the sort
Page 557 and 558:
43 Bookmark Object The bookmark obj
Page 559 and 560:
Bookmark Object Properties, General
Page 561 and 562:
44 Search Object Search objects can
Page 563 and 564:
Show Fields from Table This drop-do
Page 565 and 566:
44.4 Search Object Properties: Sort
Page 567 and 568:
45 Container The container is an ob
Page 569 and 570:
Container Properties, General Exist
Page 571 and 572:
Display Object Type Icons Enable th
Page 573 and 574:
46 Custom Object The custom object
Page 575 and 576:
Currently Selected OCX The name of
Page 577 and 578:
47 Server Objects Pane The Server O
Page 579 and 580:
My Server Objects Server Objects, M
Page 581 and 582:
48 Layout Themes 48.1 About QlikVie
Page 583 and 584:
All properties in the theme which a
Page 585 and 586:
Set as default theme for this docum
Page 587 and 588:
Part 6 Charts Part 6 Charts 587
Page 589 and 590:
Grid chart Gauge chart Block chart
Page 591 and 592:
49.2 Selections in Charts and Table
Page 593 and 594:
Part 6 Charts Once a chart is creat
Page 595 and 596:
Chart Types Part 6 Charts Charts ar
Page 597 and 598:
50 Bar Chart The bar chart is the m
Page 599 and 600:
Print as PDF... Opens the Print dia
Page 601 and 602:
Available Fields/Groups Lists all f
Page 603 and 604:
Settings for Selected Dimension In
Page 605 and 606:
Play Once Enable this option if you
Page 607 and 608:
Limits Restrict Which Values are Di
Page 609 and 610:
50.6 Chart Properties: Expressions
Page 611 and 612:
The relative width of the line can
Page 613 and 614:
Display Options This group is used
Page 615 and 616:
Display Options Representation This
Page 617 and 618:
Trendlines In selected QlikView cha
Page 619 and 620:
By clicking the Default button, dim
Page 621 and 622:
Plot Color Style This control can b
Page 623 and 624:
In the Values on Data Points group
Page 625 and 626:
Legend Settings The Legend Settings
Page 627 and 628:
Line Formatting Defines the layout
Page 629 and 630:
In this dialog the appearance of th
Page 631 and 632:
50.11 Chart Properties: Colors Char
Page 633 and 634:
In the this dialog, color settings
Page 635 and 636:
Timestamp Shows values that can be
Page 637 and 638:
51 Line Chart An example of a Line
Page 639 and 640:
Clear All Selections Clears all sel
Page 641 and 642:
51.9 Chart Properties: Presentation
Page 643 and 644:
In the Legend group you can control
Page 645 and 646:
52 Combo Chart An example of a Comb
Page 647 and 648:
Copy to Clipboard This cascade menu
Page 649 and 650:
Cluster Distance (0 - 8) Denotes th
Page 651 and 652:
Delete Highlight an existing text i
Page 653 and 654:
53 Radar Chart An example of a Rada
Page 655 and 656:
Page 657 and 658:
Cluster Distance (0 - 8) Denotes th
Page 659 and 660:
Delete Highlight an existing text i
Page 661 and 662:
54 Scatter Chart An example of a Sc
Page 663 and 664:
Page 665 and 666:
54.7 Style In this page you can sor
Page 667 and 668:
Enable X-Axis Scrollbar Enable this
Page 669 and 670:
54.9 Chart Properties: Axes (Scatte
Page 671 and 672:
54.11 Number On the Number page you
Page 673 and 674:
55 Grid Chart An example of a grid
Page 675 and 676:
Page 677 and 678:
Trendline Width This setting determ
Page 679 and 680:
Reference Lines The Reference Lines
Page 681 and 682:
56 Pie Chart An example of a pie ch
Page 683 and 684:
Page 685 and 686:
Highlight If enabled, hovering with
Page 687 and 688:
57 Funnel Chart An example of a Fun
Page 689 and 690:
Page 691 and 692:
Reversed Orientation Enable this ch
Page 693 and 694:
58 Block Chart An example of a Bloc
Page 695 and 696:
Page 697 and 698:
1st Dimension Relative Total 2nd Di
Page 699 and 700:
59 Gauge Chart Some examples of Gau
Page 701 and 702:
Page 703 and 704:
Add Click this button to add a new
Page 705 and 706:
Chart Properties, Presentation (LED
Page 707 and 708:
60 Mekko Chart An example of a Mekk
Page 709 and 710:
Minimize Iconizes the object. Click
Page 711 and 712:
In the Values on Data Points group
Page 713 and 714:
60.11 Number On the Number page you
Page 715 and 716:
61 Pivot Table An example of a Pivo
Page 717 and 718:
Note! It is possible to disable the
Page 719 and 720:
Attach Attaches a detached pivot ta
Page 721 and 722:
Help Opens QlikView help. Remove Re
Page 723 and 724:
In the Multiline Settings (Expressi
Page 725 and 726:
Cell Borders Transparency 61.10 Num
Page 727 and 728:
62 Straight Table An example of a S
Page 729 and 730:
Change Value Only available for exp
Page 731 and 732:
62.7 Chart Properties: Sort (Straig
Page 733 and 734:
Conditional The column will be show
Page 735 and 736:
Values can be specified for three d
Page 737 and 738:
63 Edit Expression Dialog The Edit
Page 739 and 740:
Show System Variables Check this al
Page 741 and 742:
Step 1 - Enter a Value Expression T
Page 743 and 744:
Step 3 - Finalize In this page you
Page 745 and 746:
64 Boxplot Wizard The first time yo
Page 747 and 748:
65 Quick Chart Wizard The Quick Cha
Page 749 and 750:
Step 3: Define Expression The chart
Page 751 and 752:
Step 4: Chart format (pie chart) In
Page 753 and 754:
Step 4: Chart format (gauge chart)
Page 755 and 756:
66 Time Chart Wizard The time chart
Page 757 and 758:
Expression and time references This
Page 759 and 760:
Define comparison period In this pa
Page 761 and 762:
67 Statistics Chart Wizard The Stat
Page 763 and 764:
Click Finish to finalize the chart
Page 765 and 766:
68 Chart Expressions Expressions ar
Page 767 and 768:
This syntax uses the selections in
Page 769 and 770:
Less than A numeric comparison is m
Page 771 and 772:
Expression must not contain aggrega
Page 773 and 774:
Examples: MinString( Currency ) Min
Page 775 and 776:
Expression must not contain aggrega
Page 777 and 778:
linest_b( Y, X, 1, 1 linest_r2 ([{s
Page 779 and 780:
linest_df ([{set_expression}][ dist
Page 781 and 782:
correl ([{set_expression}] [ distin
Page 783 and 784:
fields are not fixed. Listing all o
Page 785 and 786:
the entire data-pair to be disregar
Page 787 and 788:
The same limitations with regard to
Page 789 and 790:
value can be counted one or more ti
Page 791 and 792:
value [, eq_var = true]) (page 788)
Page 793 and 794:
eturns the aggregated value for the
Page 795 and 796:
TTest1w_upper ([set_expression][ to
Page 797 and 798:
The same limitations with regard to
Page 799 and 800:
The distribution_mode values above
Page 801 and 802:
The most common case, however, is a
Page 803 and 804:
Set Modifiers with Implicit Field V
Page 805 and 806:
Chart General Numeric Functions In
Page 807 and 808:
numsum( null( ) ) returns 0 Note! T
Page 809 and 810:
Examples: sign(x) odd( 3 ) returns
Page 811 and 812:
angemax (above(sum(x),-1,3)) return
Page 813 and 814:
Examples: rangenullcount (1,2,4) re
Page 815 and 816:
angecorrel(x-value , y-value { , x-
Page 817 and 818:
If the table or table equivalent ha
Page 819 and 820:
after([ total ] expression [ , offs
Page 821 and 822:
If the pivot table has multiple hor
Page 823 and 824:
ank( sum( Sales ), 2 ) rank( sum( S
Page 825 and 826:
getselectedcount ( Year ) getselect
Page 827 and 828:
Money# money#(expression [ , format
Page 829 and 830:
timestamp#( A, 'YYYY-MM-DD hh_mm' )
Page 831 and 832:
69 Examples 69.1 Examples of Aggreg
Page 833 and 834:
count({$} DISTINCT [Invoice Number]
Page 835 and 836:
70.1 Examples of Chart Ranking Func
Page 837 and 838:
Mode 1 In both cases the lower rank
Page 839 and 840:
71.1 Examples of Chart Inter Record
Page 841 and 842:
Above Function Examples These examp
Page 843 and 844:
Column 6 With the total qualifier,
Page 845 and 846:
72 Nested Aggregations and Related
Page 847 and 848:
Two things are to be noted: The sec
Page 849 and 850:
If you want to display the regressi
Page 851 and 852:
73 Calculated Formulas In the prope
Page 853 and 854:
74 Field Groups One main difference
Page 855 and 856:
75 Custom Error Messages The Custom
Page 857 and 858:
Part 7 Number Formats Part 7 Number
Page 859 and 860:
Data Without Type Information Part
Page 861 and 862:
76.3 Dates and Times Part 7 Number
Page 863 and 864:
A3) With number format date 'MM/DD/
Page 865 and 866:
77 Format Codes for Interpretation
Page 867 and 868:
num(199, '(rom)') returns cxcix num
Page 869 and 870:
Part 8 Macros and Automation Part 8
Page 871 and 872:
Field events: Part 8 Macros and Aut
Page 873 and 874:
79 Internal Macro Interpreter QlikV
Page 875 and 876:
name = qvlib.InputBox("What is your
Page 877 and 878:
79.4 Macro Debugger The Macro Debug
Page 879 and 880:
80 Getting Hold of a QlikView Docum
Page 881 and 882:
81 VBScript Function Calls from Scr
Page 883 and 884:
82 Using Macros in QV Documents on
Page 885 and 886:
Part 9 Appendix Part 9 Appendix 885
Page 887 and 888:
Additional Requirements for QlikVie
Page 889 and 890:
B Keyboard Command Shortcuts In thi
Page 891 and 892:
B.8 Object Menu Command Shortcuts (
Page 893 and 894:
C Application Performance Optimizat
Page 895 and 896:
table_3: Load Alfa, If ( Flag = 1,
Page 897 and 898:
D Frequently Asked Questions D.1 In
Page 899 and 900:
Q: Can I use Where clauses, Group B
Page 901 and 902:
Q: Which sheet objects can be minim
Page 903 and 904:
E Data Protection Issues Most of th
Page 905 and 906:
F Backus-Naur Formalism The QlikVie
Page 907 and 908:
Glossary A absolute path The locati
Page 909 and 910:
column Term commonly used instead o
Page 911 and 912:
F field Equivalent to column in dat
Page 913 and 914:
list box A sheet object that displa
Page 915 and 916:
QlikView OCX QlikView packaged as a
Page 917 and 918:
Section Access A section of the Qli
Page 919 and 920:
U URL Universal Resource Locator. A
Page 921 and 922:
Index - - 284, 768 $ $ 273 $fields
Page 923 and 924:
Chart Properties: Presentation (Sca
Page 925 and 926:
Export 105 Export Action Settings d
Page 927 and 928:
InWeek 344 InWeekToDate 345 InYear
Page 929 and 930:
nPer 316 NPV 294, 784 null 330 Null
Page 931 and 932:
Scatter Chart: Object Menu 661 Sche
Page 933 and 934:
TTest_sterr 296, 787 TTest_t 295, 7
show all

QlikView Reference Manual.pdf - QlikCommunity - QlikView

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?