QlikView Reference Manual.pdf - QlikCommunity - QlikView

Enable X-Axis Scrollbar
Enable this check box to show a scroll control in place of the X-axis. The
scroll bar can be used to scroll the selection of the X-axis values that are displayed.
The number of values shown at any one time will be the number set
under When Number of Items Exceeds.
In the Reference Lines group you can define reference (grid-) lines intersecting the chart plot area from a
given point on a continuous x-axis or a y-axis. Existing reference lines are listed in the window.
Add Opens the Reference Lines (page 626) dialog where a new reference line in
the chart can be created.
Edit Highlight an existing reference line in the list and click this button to edit its
properties in the Reference Lines (page 626) dialog.
Delete Highlight an existing reference line in the list and click this button to delete it
from the list.
The Texts in Chart group is used for adding free-floating text to the chart.
Add Opens the Chart Text (page 627) dialog where a new chart text in the chart
can be created.
Edit Highlight an existing text in the list and click this button to edit its properties
in the Chart Text (page 627) dialog.
Delete Highlight an existing text in the list and click this button to delete it from the
list.
Free-floating texts appear at the top left position in the chart, but can be repositioned when the chart is in
chart layout edit mode, see Sizing and Moving Chart Components (page 592).
Reference Lines
The Reference Lines dialog for Scatter and Grid chart.
The dialog may vary slightly in appearance depending on the kind of chart that is used. A reference line is a
line intersecting the chart plot area from a given point on one or both axes. It may be used, for example, to
667