SDM-8400 HIG.book - Comtech EF Data

More documents

Recommendations

Info

NetPerformer SDM-8400 Hardware Installation Guide NOTE: The RoHS symbol appears only on units which are RoHS compliant. Refer to “.Restriction of Hazardous Substances - RoHS” on page 2-8. 1.3.3 Checking the Contents of Your Product Package Caution: As soon as you receive your SDM-8400, check the carton and its contents for any sign of damage during shipment. If there is any damage, contact the shipping agent immediately. Before you start SDM-8400 installation, verify the contents of the carton to ensure that you have received all the units, accessories and cables that you ordered. NOTE: A summary of product items appears on “Product Description” on page 5-1. If any items are missing, or if you have any questions concerning your shipment, contact NetPerformer Technical Support. 1.3.4 Returning an SDM-8400 Unit If you need to return the SDM-8400 for any reason, you must ship it in the original carton using adequate shock insulation material. Failure to do so may void the equipment warranty. Consult the Warranty statements included with the product package. Contact NetPerformer Technical Support for RMA requirements. 1-8 Memotec
1.4 About HyperTerminal Preface The HyperTerminal� communications program comes with Microsoft� Windows� products, and can be used for very basic NetPerformer console functions if no terminal emulation program is available. Caution: HyperTerminal is not recommended for adjusting the NetPerformer configuration or monitoring its operations. Known problems include the following: • The arrow keys cannot be used to view channel status on all slots • The console speed cannot be changed from the default 9600 bps after the console connection is up and running • On some computers, the default Emulation setting of the HyperTerminal� communications program can potentially cause problems for console operations. If you must use HyperTerminal for your console connection, you should change the Emulation setting from Auto detect to ANSI, as follows: 1. Access HyperTerminal using the Windows Start button and drop-down menus: Start > Programs > Accessories > Communications > HyperTerminal 2. If you have already defined the connection to the NetPerformer console port, open that connection: File > Open > your_filename.ht 3. If you have not yet defined the connection to the NetPerformer console port, create a new connection: File > New Connection > your_filename 4. Open the Properties window for the connection: File > Properties 5. Click on the Settings tab to view the current value of the Emulation parameter. 6. Select the value ANSI from the list box for the Emulation parameter. 7. Click OK. NOTE: The above procedure does not resolve the problems with arrow key functionality or console speed, and should be considered a temporary solution only. You should procure a more robust terminal emulation software program for configuration and monitoring purposes. Contact NetPerformer Technical Support if you need further assistance. Memotec 1-9
Page 1 and 2: NetPerformer ® SDM-8400 Hardware I
Page 3 and 4: Contents Chapter 1: Preface. . . .
Page 5 and 6: Chapter 6: Troubleshooting . . . .
Page 7 and 8: List of Figures Location of the Pro
Page 9 and 10: List of Tables System status LED st
Page 11 and 12: Preface 1 Memotec 1-1
Page 13 and 14: 1.2 About this Document 1.2.1 Audie
Page 15 and 16: 1.2.5 ACTView 3000 Document Set 1.2
Page 17: 1.3.2 Providing Product Numbers to
Page 21 and 22: Compliance Information 2 Memotec In
Page 23 and 24: 2.2 Compliance and Regulatory State
Page 25 and 26: 2.2.2 Marking Compliance Informatio
Page 27 and 28: 2.3 Environmental Information 2.3.1
Page 29 and 30: 2.4 China RoHS Compliance Informati
Page 31 and 32: Unpacking 3 Memotec 3-1
Page 33 and 34: 3.2.3 Environmental Requirements Un
Page 35 and 36: Hardware Installation 4 Memotec 4-1
Page 37 and 38: 4.2 Installing the Unit in a Rack A
Page 39 and 40: 4.3 Powering Up the Unit 4.3.1 Conn
Page 41 and 42: 4.4 Connecting the Console Terminal
Page 43 and 44: 4.5 Installing the Licensed Softwar
Page 45 and 46: Product Description 5 Memotec 5-1
Page 47 and 48: Product Description Physical Port P
Page 49 and 50: State Interpretation Blinking Red/A
Page 51 and 52: The following table describes the R
Page 53 and 54: Pin No. Usage Description 2 DTR DTE
Page 55 and 56: 5.6 Rackmount Kit Product Descripti
Page 57 and 58: Troubleshooting 6 Memotec 6-1
Page 59 and 60: Console connection does not work, w
Page 61 and 62: 7 Serial Port and User Equipment Co
Page 63 and 64: Serial Port and User Equipment Conn
Page 65 and 66: 7.5 Custom Serial Cable Specificati
Page 67 and 68: Serial Port and User Equipment Conn
Page 69 and 70:
Serial Port and User Equipment Conn
Page 71 and 72:
Networking Features 8 Memotec 8-1
Page 73 and 74:
8.3 Data Features Networking Featur
Page 75 and 76:
Index A Access methods 3-4 ACT LED
Page 77 and 78:
NetPerformer SDM-8400 Hardware Inst
show all

SDM-8400 HIG.book - Comtech EF Data

Create successful ePaper yourself

Delete template?

Save as template?