CPNMD Interconnect Pipeline Specs 8-1-12 - Garney Construction

Description and Service
Beam Clamps, Malleable Iron or
Steel, 12 inch and smaller pipe
TABLE 1
TYPES OF SUPPORTS
(CPNMD )
(INTERCONNECT PIPELINE ) 15140
(167558.0200 ) -5-
(08/01/12 )
MSS SP 69
Type (Note 1) Specification
21 B-Line "3050" and "3055" or Anvil
"133" and "134".
28, 29 Anvil "292".
30 B-Line "3054" or Anvil "228".
Side Beam Bracket 34 B-Line "B3062" or Anvil "202".
Wall Supports and Frames, Steel,
12 inch and smaller pipe (Note 2)
Brackets 32 B-Line "B3066" or Anvil "195".
33 B-Line "B3067" or Anvil "199".
Prefabricated channels -- 12 ga, galv, 1-5/8 inches, with
suitable brackets and pipe clamps.
Offset pipe clamp,
-- Galv, 1-1/4 by 3/16 inch steel, with
1-1/2 inch and smaller pipe
3/8 inch bolts.
Offset pipe clamp, 2 to
-- Galv, 1-1/4 by 1/4 inch steel, with
3-1/2 inch pipe
Floor Supports, Steel or Cast Iron
3/8 inch bolts.
6 inch and smaller pipe 37 (with base) B-Line "B3090" or Anvil "259".
8 through 12 inch pipe 38 B-Line "B3093" or Anvil "264".
Pipe Alignment Guides -- B-Line "B3281" through "B3287" or
Anvil "255".
Turnbuckles Steel 13 B-Line "B3202" or Anvil "230".
Hanger Rods, Carbon Steel,
Threaded Both Ends, 3/8 inch
minimum size
-- B-Line "B3205" or Anvil "140".
Weldless Eye Nut, steel 17 B-Line "B3200" or Anvil "290".
Insulation Protection Saddle 39 B-Line "B3160 Series" or Anvil "160
Series".
Insulation Protection Shield 40 B-Line "B3151" or Anvil "167".
Table 1 Notes:
1. MSS SP-69 supports and hangers are illustrated on Figure 1-15140.
2. Pipe clamps or other devices which rely on the application of a clamping force to the
supported pipe in order to maintain the clamp position or location in a prefabricated
channel or track will not be acceptable for use with nonmetallic pipe or tubing.
3. Alternatively, pipe hangers for 12 inch pipe may be saddle type as indicated on the
Drawings.