ypoc - Sears Canada

SECTION VII. BUTTONHOLE
Automatic Buttonhole
1 Stitch selector: (BH)
2 Stitch width: 3 to 6.5
3 Stitch length: 0.25 to 1.0
4 Needle thread tension: 2 to 6
5 Presser foot R:
Automatic buttonhole foot
• Preparation for sewing
1 Groove
2 Pin
Attach the automatic buttonhole foot R. Make sure the
groove on the foot holder catches the pin on the foot when
lowering the presser foot.
copy
•To sew
1 Button holder
2 Buttonhole lever
The buttonhole size is automatically set by placing the
button in the rear of the automatic buttonhole foot.
The button holder on the foot takes a button up to 1.0"
(2.5 cm) in diameter.
Make a test buttonhole on an extra piece of the fabric to
check your settings.
Use interfacing on stretch fabrics.
1 Pull the button holder 1 to the back, and place the
button in it. Push it forward tightly against the button.
2
1
Pull the buttonhole lever 2 down as far as it will go.
1
1
4
5
4
3
1
2
3
5
2
2
2
76