ypoc - Sears Canada

If the button is extremely thick, make a test buttonhole.
If it is difficult to fit the button through the test buttonhole,
lengthen the buttonhole by pulling the button holder back to
create a gap 1 .
1 Gap
•How to adjust buttonhole stitch density
Slide the stitch length control to adjust stitch density.
Slide the stitch length control to 1 for a looser density 1 .
Slide the stitch length control to 0.25 for a tighter density
2 .
copy
2
1
R
1
If the sides of the buttonhole are not balanced, do the
following:
• If the buttonhole looks like 3 , use the screwdriver to
move the lever to the right (+) to make the left side
of the buttonhole less dense (see illustration).
• If the buttonhole looks like 4 , use the screwdriver to
move the lever to the left (–) to make the left side of the
buttonhole denser.
5 Buttonhole pitch balance adjusting lever
3
AUTO BH
4
5
80