ypoc - Sears Canada
ypoc - Sears Canada
ypoc - Sears Canada
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Manual Buttonhole (Option)<br />
1 Stitch selector: (BH)<br />
2 Stitch width: 3 to 6.5<br />
3 Stitch length: 0.25 to 1.0<br />
4 Needle thread tension: 2 to 6<br />
5 Presser foot B:<br />
Buttonhole foot<br />
•To sew<br />
If the diameter of the button is more than 1.0" (2.5 cm), a<br />
buttonhole must be made manually as follows:<br />
1 Turn the handwheel toward you to raise the needle to<br />
its highest position. Raise the presser foot.<br />
2<br />
3<br />
4<br />
Set the stitch at “ ” by turning the stitch selector.<br />
Attach the buttonhole foot [B].<br />
1<br />
copy<br />
Pull the buttonhole lever downward as far as it will go.<br />
5 Lower the needle into the garment where the buttonhole<br />
is to start, and lower the foot.<br />
6 Sew the front bartack and left row, then stop.<br />
7 Click the buttonhole lever toward you.<br />
4<br />
2<br />
5<br />
6 7<br />
3<br />
1<br />
4<br />
5<br />
4<br />
3<br />
2<br />
3<br />
5<br />
8 Sew the back bartack and right row, then stop the<br />
machine at the starting point.<br />
To cut the opening and to reset for sewing the next<br />
buttonhole, refer to instructions 4 and 5 on<br />
page 80.<br />
8<br />
84