*Voir et Entendre n'a jamais eu autant de sens - Pioneer

Use Other Equipment With Your Flat Panel TV 05
5.11 Add Other Audio Equipment
The flat panel TV’s digital audio output terminal (optical) can output Dolby Digital signals. Using an optical digital
cable, connect an AV receiver to the digital audio output terminal (optical) on the rear of the flat panel TV. This
connection allows audio such as from digital TV broadcasts to play back in high quality.
If your AV receiver does not have a digital audio input terminal (optical), connect the AUDIO OUT terminals (AUDIO)
on the rear of the flat panel TV to the audio input terminals on the AV receiver. However, this method may result in
audio delay between the speakers and the sound from the AV receiver. To reduce the delay, mute the speakers on
the flat panel TV. Nonetheless, you may still experience some delay between the sound and the picture.
English
T
W
T
W
Rear view
This connection is
not required
when connecting
an AV amp
equipped with
the surround
function to a
subwoofer.
AV cable
(commercially
available)
Optical digital
cable
(commercially
available)
Subwoofer
AV receiver
Audio signals synchronized with currently displayed images are output to the AUDIO OUT terminals. However,
audio accompanying the images are output to the SUB WOOFER OUT terminal.
When using the digital audio output terminal (optical), select settings according to your AV Receiver. For more
information, see the operating instructions that came with the AV receiver.
Note: When signals are input from the HDMI terminals, no signals are output from the DIGITAL OUT terminal if
they are copy guarded.
To set the DIGITAL OUT terminal (OPTICAL) for your AV Receiver, follow the steps below.
1 ) Access the System Setup through the Setup.
2 ) Select Digital Audio Output from the System Setup menu.
3 ) Select an option from the submenu.
Option
Dolby Digital
PCM
Description
outputs in Dolby Digital for the Dolby format and
outputs in PCM for the PCM format (default)
outputs in the PCM format regardless of signal type
4 ) Press HOME MENU to exit the menu.
111
En