24.05.2014 Views

*Voir et Entendre n'a jamais eu autant de sens - Pioneer

*Voir et Entendre n'a jamais eu autant de sens - Pioneer

*Voir et Entendre n'a jamais eu autant de sens - Pioneer

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

02 Install Your Flat Panel TV<br />

Attach/D<strong>et</strong>ach the Speaker<br />

The flat panel TV’s speaker <strong>de</strong>livers high-quality, clear sound. The left/right balance is enclosed in a single unit for<br />

ease of installation and compactness. Although other <strong>de</strong>vices can be ad<strong>de</strong>d or removed from the mounted panel,<br />

physically attach the speaker last. Disconnect the cables from the Speaker and REMOVE THE SPEAKER before<br />

mounting or moving the panel.<br />

Before attaching the speaker to your mounted panel, review the information below.<br />

• Lay the panel face down on a stable surface when attaching speaker brack<strong>et</strong>s.<br />

• Use only the supplied screws and tighten securely before stepping away.<br />

• The speaker is wi<strong>de</strong> and requires more than a single person to manage.<br />

• Handle the speaker carefully to protect the cabin<strong>et</strong> and grille n<strong>et</strong> from scratches and other damage.<br />

• Placing a CRT monitor near the speaker can cause a blur on the flat panel TV. Keep the distance b<strong>et</strong>ween the<br />

speaker and the monitor.<br />

• Connecting this speaker to another panel or <strong>de</strong>vice can<br />

damage the unit or cause a fire.<br />

• When using tone control to increase treble, avoid overamplifying<br />

the volume.<br />

Note: Use the foam packing materials to protect the equipment from scratches or other damage during<br />

mounting.<br />

Stand-Mounted Panel<br />

It is possible to attach the speaker brack<strong>et</strong>s to the flat panel TV while it is standing upright though it is easier to<br />

mount the brack<strong>et</strong>s while the panel is laying flat. Once the brack<strong>et</strong>s are attached, stand the panel upright then<br />

move it into the final position before mounting the speaker.<br />

1 ) Attach the si<strong>de</strong> speaker brack<strong>et</strong>s (left and right) to the back of the panel using the supplied screws.<br />

(PDP-6020FD)<br />

(PDP-5020FD)<br />

Speaker mounting<br />

screw (M5 x 10 mm)<br />

➁<br />

➀<br />

1 ) Tighten the screw in the<br />

upper screw hole first.<br />

2 ) Then, tighten the screw in<br />

the screw hole right un<strong>de</strong>r<br />

the upper hole.<br />

➁<br />

➀<br />

Speaker brack<strong>et</strong> (si<strong>de</strong>)<br />

When looking at the back of the<br />

flat panel TV, si<strong>de</strong>s are reversed.<br />

Tighten screws in the or<strong>de</strong>r<br />

shown above.<br />

18<br />

En

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!