Mod. 1092 Sch./Ref. 1092/602

3 INSTALLATION PROCEDURESThis section contain detailed instructions for installing Urmet Domus 1092/602 camera. These instructionsassume that the installer has a good knowledge of installation techniques and is capable of adopting safeinstallation methods.3.1 BASIC SYSTEM CONFIGURATION FOR THE USE OF THERA 5The minidome THERA 5 has an embedded receiver which decodes the commands coming from the controlkeypad Ref. 1092/620 (see chapter 4.2). For a correct operation, at least one control keypad is needed. Thiskeypad manages the configuration of operating parameters and the function of pan (360° continuous) and tilt(180°), motorized zoom, recall and programming of pre-defined sequences of THERA 5.3.2 INSTALLATION TYPESTwo solutions are available for installing THERA 5.‣Wall mounting with standard bracket.‣Wall mounting with kit composed by bracket and connection power box IP66 Ref. 1092/628.NoteRegardless of the installation type, it is suggested to:‣Connect a switch for minidome maintenance operations.‣Check that on terminals of RS - 485 lines suitable termination resistors (120 Ω ¼ W), not provided,are connected.DS1092-090 51