Mod. 1092 Sch./Ref. 1092/602

4.5.8.1 Preset – storage of dome position and zoomSelect PRESET and press OPEN to access the following submenu:Preset>1 Number 12 Set Preset3 Call Preset4 Delete Preset5 Name -------------6 AlaName Display OFFIRIS CLOSE to ExitOption Value DescriptionNumberSet Preset /Call Preset /Delete Preset /Name /Name Display1-50 ÷ 64-77 ÷ 102-165ON/OFFThis option allows to identify the presets that can bestored. Up to 128 presets max. can be selected.This option allows to store the preset. Shoot the imagewhich must be associated to the preset and press CLOSE.Storage is confirmed by the message STORED.This operation allows to recall a stored preset (therecalled preset is the one indicated in the item“Number”).This operation allows to delete a stored preset. Selectthe preset to be deleted, press OPEN and confirm bypressing again the button. To exit without deleting,press CLOSE.This operation allows to give a name to the storedpresets. Press twice OPEN to access the screen where togive a name to the preset (see below).If ON, this operation allows to display on the monitorthe name previously stored and associated to thedisplayed preset.NAMESelect NAME and press OPEN to access the following submenu where to give a name to the preset:- - - - - - - - - - - - - - - - -0123456789ABCDEFRGHIJKLMNOPQRSTUVWXYZ-IRIS CLOSE When Done‣Use the arrow buttons to move in the position where the character must be entered.‣Press the button OPEN to select the desired number or letter.‣Use the arrow buttons to move in the position of the desired character.‣Press the button OPEN to confirm it.‣To delete the character or characters previously selected, move the cursor over the symbol afterthe letter Z and press the button OPEN.‣Press the button CLOSE to confirm the selection and quit.DS1092-090 76