Mod. 1092 Sch./Ref. 1092/602

4.5.8 MENU SETTINGS CONCERNING PROGRAMMING (FUNCTION PROGRAMMING)In the first level menu, select and its submenus to gain access to the nextmenu levels for programming THERA 5.FUNCTION PROGRAMMING>1 Preset2 Program VectorScan3 Pattern4 Sector Setup5 Masking Zone5 Motion6 Alarm In ProgrammingIRIS CLOSE to ExitOption Value DescriptionPresetProgramVectorScanPatternSector SetupNumber ÷ Set Preset ÷Call Preset÷Delete Preset÷ Name÷ DisplayNumber ÷ Program aVectorScan ÷ Run aVectorScan ÷ Delete aVectorScanNumber ÷ Name ÷ Program aPattern ÷ Delete aPattern ÷ Name DisplayNumber÷Name ÷ Pan StartPOS ÷ Pan End POS ÷ TiltStart POS ÷ Name DisplayIt allows to access all the functions concerning Preset,like storage, selection, naming and deletion (see below).It allows to access all the functions concerningVectorScan, like storage, selection and deletion (seebelow).It allows to access all the functions concerning Pattern,like storage, selection, naming and deletion (see below).It allows to define a certain sector and give it a name; inthis way the area can be identified each time it isdisplayed (see below).Masking ZoneMotionAlarm InProgrammingNumber ÷ Mask Edit ÷ MaskDisplayPark Action ÷ Power OnAction ÷ Limit OperationChannel Number ÷ LabelEdit ÷ Label Display ÷Action Setup ÷ ChannelEnableThe function Masking Zone allows to specify up to 4 privacyzones that mask specific areas, which become invisible tothe operator. A Masking Zoneis displayed on the screen witha rectangle, which size has been previously selected by theuser (see below).It allows to access to all the functions concerning domemovements (see below).It allows to access the alarm functions that the user canassociate to specific functions of the dome (see below).DS1092-090 75