Mod. 1092 Sch./Ref. 1092/602

4.5.8.2 Program vectorscan – definition of a path made by preset, pattern and vectorscanSelect PROGRAM VECTORSCAN and press OPEN to access the following submenu:Opzione Valore SpiegazioneNumber 1 ÷ 6Program a VectorScan /This option allows to identify VectorScan to be stored.Up to 6 VectorScan max. can be selected.This option allows to define the operations to beperformed by the selected VectorScan (16 max.). Foreach operation it is possible to define the actionkind, the number to which it is associated, themovement speed and the dwell time (see below).Run a VectorScan / This option allows to start the selected VectorScan.Delete a VectorScan /This option allows to delete the selected VectorScan bypressing twice the button OPEN.PROGRAM A VECTORSCANSelect Program a VectorScan and press OPEN to access the following submenu where it is possible todefine the parameters of the VectorScan to be stored:PROGRAM VECTORSCANName Num SP Dwell1 - - - -2 - - - -3 Pr 1 5 34 - - - -5 - - - -6 - - - -7 - - - -8 - - - -IRIS CLOSE When DoneUse the arrow buttons to move the cursor in the position where the data must be entered.1 – is the action number; up to 16 actions max. can be entered.Name – is the action kind; with the button OPEN select Pr (Preset), Vs (VectorScan),Pt (Pattern).Num – is the number referred to the previous storage value of the selected action; press the button OPEN toaccess the selection screen.1~50 64~77 102~165_ _ _ ∟0123456789‣Press the arrow buttons to move the cursor in the desired position.‣Press the button OPEN to access the numeric selection.‣Press the arrow buttons to select the desired number.‣Press the button OPEN to confirm it.‣Press the button CLOSE at the end of selection.‣Move on the symbol ∟ and press the button OPEN to go back to the previous screen.SP – is the movement speed between two actions; values from 1 to 9 can be selected, press the buttonOPEN to select the desired speed.DS1092-090 77