Mod. 1092 Sch./Ref. 1092/602

4.5.3 Settings of main programming procedures via the menu (Control Options)From the first level menu, select and its submenus to access the main menus forprogramming THERA 5.CONTROL OPTIONS>1 Auto Flip ON2 Proportional Speed ON3 Pan Reverse OFF4 Tilt Reverse OFF5 Vector Scan Still OFF6 Auto Focus PTZ7 Auto AE PTZ8 VectorScan AF ON9 +2 Tilt Limit OFF10 Speed limit OFFIRIS CLOSE to ExitOption Value DescriptionAuto FlipProportional SpeedOn/offON/OFFIf this mode is active (ON), the dome can follow the trajectory ofan object that moves and goes under the dome, only with thevertical movement of the joystick. This because the dome, when invertical position, performs an automatic pan movement of 180degrees in order to reach a position where the tilt movements areagain possible.If this mode is active (ON), pan and tilt speed, configured with thekeypad, is proportional to the configured zoom. Therefore themotion speed is reduced when the zoom increases.Pan RiverseTilt RiverseON/OFFON/OFFVectorScan Still ON/OFF FUNCTION NOT ENABLEDIf this mode is active (ON), joystick commands for pan function arereversed.If this mode is active (ON), joystick commands for tilt function arereversed.Auto FocusAuto AEON/OFF/PTZ/ZON/OFF/PTZ/ZIf activated with ON, the dome will automatically control the imagefocus. If activated with PTZ, the dome will focus images only whenusing Pan, Tilt and Zoom functions. If activated with Z, the domewill focus images only when using the zoom function.If activated with ON, the dome will automatically control the imageexposure. If activated with PTZ, the dome will perform this controlonly when using Pan, Tilt and Zoom functions. If activated with Z,the dome will perform this control only when using the zoomfunction.VectorScan AF ON/OFF FUNCTION NOT ENABLED+2 Tilt Limit ON/OFFSpeed limitON/OFFIf activated with ON, the limit of dome tilt will increase of 2degrees, changing from 0° to -2°.If activated with ON , this function halves the previously configureddome speed.DS1092-090 65