11.07.2015 Views

TGS173 - Black & Decker

TGS173 - Black & Decker

TGS173 - Black & Decker

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

FLIP-OVER SAW <strong>TGS173</strong>ENGLISHCongratulations!You have chosen an Elu Power Tool. Years of experience, thoroughproduct development and innovation make Elu one of the most reliablepartners for professional Power Tool users.Table of contentsTechnical data en - 1EC-Declaration of conformity en - 1Safety instructions en - 2Package contents en - 3Description en - 3Electrical safety en - 4Mains plug replacement (U.K. & Ireland only) en - 4Using an extension cable en - 4Assembly and adjustment en - 4Instructions for use en - 6Maintenance en - 8Guarantee en - 8Technical data<strong>TGS173</strong>Voltage V 230(U.K. & Ireland only) V 230/115(Latin America only) V 120Motor power (input) W 1,650Motor power (output) W 1,100Blade diameter mm 250Blade bore mm 30Max cycle of use load/no load min 1/3No-load speed (50/60 Hz) min -1 3,000/3,600Saw head pre-set locations left/right ° 0-45Bevel adjustment ° 0-45Cutting capacitiessee under “Description”Weight kg 38Fuses:Europe 230 V tools 10 Amperes, mainsU.K. & Ireland 230 V tools 13 Amperes, in plugsEC-Declaration of conformity<strong>TGS173</strong>Elu declares that these Power Tools have been designed in compliancewith: 98/37/EEC, 89/336/EEC, 73/23/EEC, EN 61029, EN 55014-2,EN 55014, EN 61000-3-2 & EN 61000-3-3.For more information, please contact Elu at the address below or refer tothe back of the manual.Level of sound pressure according to 86/188/EEC & 98/37/EEC,measured according to DIN 45635:<strong>TGS173</strong>L pA(sound pressure) dB(A)* 83L WA(acoustic power) dB(A) 96* at the operator’s earTake appropriate measures for the protection of hearing if thesound pressure of 85 dB(A) is exceeded.Weighted root mean square acceleration value according to DIN 45675:TÜV RheinlandProduct and Safety GmbH (TRPS)Am Grauen Stein 1D-51105 KölnGermanyDirector Engineering and Product DevelopmentHorst Großmann<strong>TGS173</strong>< 2.5 m/s 2Cert. No.BM 9910081 01The following symbols are used throughout this manual:Denotes risk of personal injury, loss of life or damage to thetool in case of non-observance of the instructions in thismanual.Denotes risk of electric shock.Sharp edges.Elu International, Richard-Klinger-Straße 40,D-65510, Idstein, Germany18 en - 1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!