TORNEAMENTO DE MATRIZES NITRETADAS DE AÇO AISI H10 ...

Capítulo 7
Referências Bibiográficas
• ABRÃO, A.M., 1995, “Tool Life And Workpiece Surface Integrity Evaluations
When Machining Hardened AISI H13 and AISI E52100 Steels With
Conventional Ceramic And PCBN tool Materials”, Society Manufacturing
Engineers.
• ALMEIDA, C. H. D. “A Utilização de Ferramentas Cerâmicas e PCBN no
Torneamento de Peças Endurecidas”, Universidade Federal de Minas Gerais,
2001.
• BARBACKI, A., KAEALEC, M. e HAMROL, A., 2002, “Turning and griding as a
source of microstructural changes in the surface layer of hardened steel”,
Journal of Materials Processing Technology, 5795, 2002.
• BOCHKO, A., BOBROVNITCHII, G., “Superhard Composites Based on Cubic
Boron Nitride”, Institute of Metallurgy and Science of AS of Russia, 2000.
• BROSKEA, T. J., “ Analyzing PCBN Tool Wear – How to identify various wear
types na minimize early tool failure”, GE , 2001.
• CHOU, Y. K., EVANS, C. J., “Tool wear mechanism in continuous cuttting of
hardened tool steels”, Elsevier Sience, 1997.
• CHOU, Y. KEVIN e EVAN, CHRIS, J. “Experimental Investigation on CBN
Turning of Hardened AISI 52100 Steel”, National Institute of Standasds and
Technology Gaitherburg, USA, 1994.
127