TORNEAMENTO DE MATRIZES NITRETADAS DE AÇO AISI H10 ...

Capítulo 7 - Referências Bibliográficas 130
• SOUZA JR., A.M.; SALES, W.F.; MACHADO, A.R. and EZUGWO, E.O., 2002,
“Influence of the Tool Wear and Cutting Parameters on the Burr Formation of
Cast Iron Milling with PCBN Tools: An Experimental Investigation”, To be
published.
• TRENT, E. M., WRIGHT, P. K. 2000, “Metal Cutting”, 4 th Edition, Butteworths-
Heinemann Ltd, 446 pg., ISBN 0-7506-7069-X.
• TRENT, E.M., 1988, “Metal Cutting and the Tribology of Seizure – I – Seizure in
Metal Cutting”, Elsevier, Holanda.
• TRENT, E.M., 1988, “Metal Cutting and the Tribology of Seizure – II –
Movement of Work Material over the Tool in Metal Cutting”, Elsevier, Holanda.
• TRENT, E.M., 1988, “Metal Cutting and the Tribology of Seizure – III –
Temperature in Metal Cutting”, Elsevier, Holanda.
• TRENT, E.M., 1984, “Metal Cutting”, 2 nd Edition, Butteworths-Heinemann Ltd,
273 pg., ISBN 0-7506-1068-9.
• VILLARES, 1988, “Aços para Ferramentas – Aços para Trabalho a Quente”.
• WILLIAMS, J.A., 1995, “Engineering Tribology”, Oxford University Press; ISBN:
0198563434.
• WRIGHT, P.K. and BIAGCHI, A., 1981, "Wear Mechanisms that Dominates
Tool-Life in Machining", Journal Applied Metal.
• ZUM GAHR, K. H., 1987, “Microstructure and Wear of Material”, Elsevier.