Levelflex M FMP40 - Process Centre Of Excellence.
Levelflex M FMP40 - Process Centre Of Excellence.
Levelflex M FMP40 - Process Centre Of Excellence.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Levelflex</strong> M <strong>FMP40</strong> with HART/4...20 mA Mounting<br />
3.4.11 Turn housing<br />
After mounting, the housing can be turned 350° in order to simplify access to the display and the<br />
terminal compartment. Proceed as follows to turn the housing to the required position:<br />
• Undo the fixing screws (1)<br />
• Turn the housing (2) in the required direction<br />
• Tighten up the fixing screws (1).<br />
2<br />
1<br />
F12/F23 housing T12 housing<br />
3.5 Post-installation check<br />
allen key<br />
4 mm/0.1”<br />
L00-FMP4xxxx-17-00-00-en-028<br />
After the measuring instrument has been installed, perform the following checks:<br />
• Is the measuring instrument damaged (visual check)?<br />
• Does the measuring instrument correspond to the measuring point specifications such as process<br />
temperature/pressure, ambient temperature, measuring range, etc.?<br />
• Are the measuring point number and labeling correct (visual check)?<br />
• Is the measuring instrument adequately protected against rain and direct sunlight (see → ä 75)?<br />
Endress + Hauser 35<br />
2<br />
1
![[MI 019-120] I/A Series Mass Flowtubes Models CFS20 ... - Invensys](https://img.yumpu.com/48832334/1/190x245/mi-019-120-i-a-series-mass-flowtubes-models-cfs20-invensys.jpg?quality=85)
Change language