Levelflex M FMP40 - Process Centre Of Excellence.

More documents

Recommendations

Info

Maintenance Levelflex M FMP40 with HART/4...20 mA 7 Maintenance The Levelflex M measuring instrument requires no special maintenance. Exterior cleaning When cleaning the Levelflex M , always use cleaning agents that do not attack the surface of the housing and the seals. Repairs The Endress+Hauser repair concept assumes that the measuring devices have a modular design and that customers are able to undertake repairs themselves. Spare parts are contained in suitable kits. They contain the related replacement instructions. All the spare parts kits which you can order from Endress+Hauser for repairs to the Levelflex M are listed with their order numbers on → ä 86 and 89. Please contact Endress+Hauser Service for further information on service and spare parts. Repairs to Ex-approved devices When carrying out repairs to Ex-approved devices, please note the following: • Repairs to Ex-approved devices may only be carried out by trained personnel or by Endress+Hauser Service. • Comply with the prevailing standards, national Ex-area regulations, safety instructions (XA) and certificates. • Only use original spare parts from Endress+Hauser. • When ordering a spare part, please note the device designation on the nameplate. Only replace parts with identical parts. • Carry out repairs according to the instructions. On completion of repairs, carry our the specified routine test on the device. • Only Endress+Hauser Service may convert a certified device into a different certified variant. • Document all repair work and conversions. Replacement After a complete Levelflex M or electronic module has been replaced, the parameters can be downloaded into the instrument again via the communication interface. Prerequisite to this is that the data were uploaded to the PC beforehand using the ToF Tool. Measurement can continue without having to carry out a new setup. • You may have to activate linearisation (see BA245F – "Description of the instrument functions" on the enclosed CD-ROM.) • You may need to record the tank map again (see Basic Setup) After an probe or electronic has been replaced, a new calibration must be carried out. This is described in the repair instructions. 74 Endress + Hauser
Levelflex M FMP40 with HART/4...20 mA Accessories 8 Accessories Various accessories, which can be ordered separately from Endress+Hauser, are available for the Levelflex M. Weather protection cover A Weather protection cover made of stainless steel is recommended for outdoor mounting (order code: 543199-0001). The shipment includes the protective cover and tension clamp. ENDRESS+HAUSER ENDRESS+HAUSER MICROPILOT MICROPILOT II II Order Order Code: Code: Ser.-No.: Ser.-No.: Messbereich Messbereich Measuring Measuring range range max. max. 20 20 mm U U 16...36 16...36 V V DC DC 4...20 4...20 mA mA T T >70°C >70°C : : Flange with horn adapter to adapt on the following nozzles Horn adapter Order-No. G 1 1/2" at DN 200 / PN 16 52014251 G 1 1/2" at DN 250 / PN 16 52014252 NPT 1 1/2" at 8" / 150 psi 52014253 NPT 1 1/2" at 10" / 150 psi 52014254 Material: 1.4435 AA IP IP 65 65 t t >85°C >85°C F12 / F23 / T12 housing Made Made in in Germany Germany Maulburg Maulburg DN 200 (8") DN 250 (10") L00-FMR2xxxx-00-00-06-en-001 L00-FMP4xxxx-17-00-00-de-026 Endress + Hauser 75 204 mm max. ~150 mm
Page 1 and 2:
Operating Instructions Levelflex M
Page 3 and 4:
Levelflex M FMP40 with HART/4...20
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24: Levelflex M FMP40 with HART/4...20
Page 73: Levelflex M FMP40 with HART/4...20
Page 107 and 108: P/SF/Konta XIV Declaration of Hazar
show all

Levelflex M FMP40 - Process Centre Of Excellence.

Create successful ePaper yourself

Delete template?

Save as template?