VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TILT<br />
NO<br />
SENS<br />
TILT<br />
SENS<br />
ACTV<br />
TROUBLESHOOTING AND MAINTENANCE : TROUBLESHOOTING A<br />
Tilt Sensor Not Found EOT flag attached to large pulley is<br />
not engaging the EOT sensor<br />
- Ensure flag is attached to the<br />
large pulley<br />
- Ensure that flag passes through<br />
the sensor at a <strong>de</strong>pth sufficient<br />
to engage the sensor beam<br />
Tilt belt disconnected, extremely<br />
loose or not installed properly<br />
- Properly install belt between tilt<br />
motor and large pulley<br />
Tilt Sensor Always Active Main board pan/tilt connector (J9)<br />
disconnected<br />
- Connect main board pan/tilt<br />
connector (J9)<br />
End-of-travel sensor connector (J2)<br />
disconnected<br />
- Connect end-of-travel sensor<br />
connector (J2)<br />
WAIT Retrieving Current Status System displays wait while getting<br />
status.<br />
WRNG<br />
SW<br />
PROG<br />
Table A-1: Troubleshooting Gui<strong>de</strong> (Continued)<br />
Error Display Description Possible Cause and Remedy<br />
Wrong Software Program Software installed does not match<br />
luminaire type<br />
- Download the correct software<br />
for the luminaire<br />
02.9671.0001 E 17-Sep-02 89