VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VARI❋LITE® - <strong>VL2000</strong> WASH LUMINAIRE USER’S MANUAL<br />
Control Channel Functions<br />
The following control actions must be accomplished with zero time transition or with<br />
timing disabled. Discrete values must be used and not manual controls such as fa<strong>de</strong>rs<br />
or enco<strong>de</strong>rs.<br />
Control<br />
Channel<br />
Function<br />
Table 3-8: Control Channel Functions<br />
% Value<br />
Control Channel Value<br />
For 3 Secs<br />
or Greater<br />
After<br />
3 Secs<br />
Display On 1 1-4 0<br />
Snap On 9 20-25 N/A<br />
Snap Off 13 30-35 N/A<br />
<strong>Luminaire</strong> Reset 33 81 - 87 0<br />
Lamp Off 66 165 - 171 0<br />
Lamp On 99 249 - 255 0<br />
To use control channel functions:<br />
Step 1. Select an action to be sent.<br />
Step 2. Set control channel value for <strong>de</strong>sired action (for example, 84 for reset). Hold<br />
value for 3 seconds.<br />
Note: A numerical keypad is required for sending values. An enco<strong>de</strong>r or fa<strong>de</strong>r does<br />
not allow for a quick value change, which is required to affect the control functions.<br />
Step 3. Set control channel value to zero. (This must occur without any scaling<br />
values. Action will be voi<strong>de</strong>d if other values are <strong>de</strong>tected between action<br />
value and zero.)<br />
Note: The Snap control channel function takes place immediately, and does not<br />
require the control value be set to zero after three seconds. For more information on<br />
Snap functionality see “Snap Colors” on page 26.<br />
42 17-Sep-02 02.9671.0001 E
Change language