VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de

OPERATION : LUMINAIRE TIMING 3
Note: Avoid changing timing channel values in a fading cue. This can cause
unexpected behavior in the luminaire as the timing channel value is updated over time.
Timing channel values and the final destination of the parameters affected by the
timing channel should always be sent in a zero count.
Timing channels can be set in either % or 0-255 (DMX) modes, with the following
values assigned. See chart on the next page.
Note: We recommend profiles set timing channels in extended modes to a default
value of 255 (full speed).
Table 3-7: Timing Channels Map
% Value DMX = Seconds
0 Full Speed
1 0.2
2 0.4
1 3 0.6
4 0.8
2 5 1
6 1.2
7 1.4
3 8 1.6
9 1.8
4 10 2
11 2.2
12 2.4
5 13 2.6
14 2.8
6 15 3
16 3.2
17 3.4
7 18 3.6
19 3.8
8 20 4
21 4.2
22 4.4
9 23 4.6
24 4.8
10 25 5
02.9671.0001 E 17-Sep-02 35