VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VARI❋LITE® - <strong>VL2000</strong> WASH LUMINAIRE USER’S MANUAL<br />
Error Messages<br />
If a problem occurs during luminaire calibration, at the end of the calibration sequence<br />
the Menu Display will cycle through any applicable error message(s), one at a time<br />
until the end of the list is reached. To review the error messages again, it will be<br />
necessary to access them using the Status function. (Refer to “Troubleshooting” on<br />
page 84 for a list of possible causes and remedies associated with the error messages.)<br />
To access error messages:<br />
Step 1. Press [Menu].<br />
Step 2. Press [Up] / [Down] arrows until Fixt (Fixture) appears. Press [Enter].<br />
Step 3. Press [Up]/ [Down] arrows to access STAT. Press [Enter]. (Display will<br />
now scroll through any error messages or display OK if no errors.)<br />
Table 4-1: Error Messages<br />
Display Message...<br />
OK No Errors Found<br />
B1M1 / MAG / NoSn Aux Board 1, Motor 1 / Magenta / Sensor Not Found<br />
B1M1 / MAG / SAct Aux Board 1, Motor 1 / Magenta / Sensor Always Active<br />
B1M2 / Dimm /<br />
NoSn<br />
Aux Board 1, Motor 2 / Dimmer / Sensor Not Found<br />
B1M2 / Dimm / SAct Aux Board 1, Motor 2 / Dimmer / Sensor Always Active<br />
B1M3 / CWhl / NoSn Aux Board 1, Motor 3 / Color Wheel / Sensor Not Found<br />
B1M3 / CWhl / SAct Aux Board 1, Motor 3 / Color Wheel / Sensor Always Active<br />
B2M1 / Blue / NoSn Aux Board 2, Motor 1 / Blue / Sensor Not Found<br />
B2M1 / Blue / SAct Aux Board 2, Motor 1 / Blue / Sensor Always Active<br />
B2M2 / Ambr / NoSn Aux Board 2, Motor 2 / Amber / Sensor Not Found<br />
B2M2 / Ambr / SAct Aux Board 2, Motor 2 / Amber / Sensor Always Active<br />
BRD1 / NO / COMM Aux Board 1 Communication Failure<br />
BRD2 / NO / COMM Aux Board 2 Communication Failure<br />
HEAD/ OVER/<br />
TEMP<br />
Head Over Temperature<br />
LAMP / STRK / FAIL Lamp Strike Failure<br />
PAN / ENCR / FAIL Pan Enco<strong>de</strong>r Failure<br />
PAN / NO / SENS Pan Sensor Not Found<br />
PAN / SENS / ACTV Pan Sensor Always Active<br />
SRCH/FOR/BRD1 Attempting to communicate with Board 1<br />
SRCH/FOR/BRD2 Attempting to communicate with Board 2<br />
TILT / ENCR / FAIL Tilt Enco<strong>de</strong>r Failure<br />
TILT / NO / SENS Tilt Sensor Not Found<br />
TILT / SENS / ACTV Tilt Sensor Always Active<br />
54 17-Sep-02 02.9671.0001 E
Change language