VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VARI❋LITE® - <strong>VL2000</strong> WASH LUMINAIRE USER’S MANUAL<br />
Display Definition Purpose<br />
PCue Play Cue Accesses cue list for play back of cues by number.<br />
POWR Lamp Power Accesses function to turn lamp on or off.<br />
PROG Programming Currently programming the new version of software.<br />
PSEQ Play Sequence Plays back cue sequence. Press [Enter] to start and<br />
[Menu] to stop.<br />
RCAL Recalibrate Currently executing Calibration.<br />
RDef Reset Default Resets <strong>de</strong>fault system configuration values.<br />
RHrs Reset Lamp Info Resets lamp hour and lamp strike counters. For use when<br />
new lamp is installed.<br />
RTST Run-Test Indicates that a system mechanism test is in progress.<br />
SAVE Save Saving cue data.<br />
ScXX Sequence Data Sequence playing cue number, where XX <strong>de</strong>fines cue number.<br />
Sens Sensors Accesses sensor choices for diagnostic testing.<br />
SEQ Sequence Play- Sets sequence playback mo<strong>de</strong> to Individual (plays cues<br />
back<br />
from each luminaire) or Master (all luminaires play same<br />
cue).<br />
SNAP Snap Enables, disables the colors (Blue, Amber, or Magenta)<br />
taking the shortest distance from one color to the next.<br />
STAT Status/Error Dis- Allows scrolling through error list or displays OK if no<br />
play<br />
errors.<br />
Stor Store Cue Stores cue by number. Cue number stored is <strong>de</strong>pen<strong>de</strong>nt<br />
on next cue ID in cue list since this field is not editable.<br />
Strb Strobe Specifies strobe function for manual control.<br />
Strk Strike Displays total number of lamp strikes.<br />
STST Sensor Test Indicates that a system sensor test is in progress.<br />
SWAP Swap Swaps pan and tilt functions for special focus requirements<br />
such as moving mirror mechanisms.<br />
Test System Tests Accesses diagnostic tests for internal mechanisms.<br />
Tilt Tilt Specifies tilt function for manual control (Man) or tilt<br />
enco<strong>de</strong>r for testing (Test).<br />
Time Timing Data Allows manual setting of timing values for dimmer/intensity,<br />
focus, color, and beam.<br />
Ver Version Displays current software version (in two pages).<br />
VIRT Virtuoso console Sets starting address for luminaire in Virtuoso systems.<br />
64 17-Sep-02 02.9671.0001 E