VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
VL2000 Wash Luminaire User's Manual - Avantgarde-technik.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VARI❋LITE® - <strong>VL2000</strong> WASH LUMINAIRE USER’S MANUAL<br />
To edit or modify a cue:<br />
Step 1. Recall cue to be changed from PCue.<br />
Step 2. Change luminaire data to <strong>de</strong>sired levels using Man (<strong>Manual</strong> Command)<br />
functions.<br />
Step 3. Press [Up] / [Down] arrows until Cue appears. Press [Enter].<br />
Step 4. Press [Up] / [Down] arrows until Mod appears. Press [Enter]. The number<br />
displayed is the same as the selected cue.<br />
Step 5. Press [Enter] and changes will be saved.<br />
To play cues as a sequence:<br />
Step 1. Press [Menu].<br />
Step 2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].<br />
Step 3. Press [Up] / [Down] arrows until PSEQ appears. Press [Enter] and the<br />
sequence will play. The active cue will be shown in the display. [Enter] to<br />
start, [Menu] to stop.<br />
To change the follow time in a sequence:<br />
The follow time is stored for each cue individually.<br />
Step 1. Select cue to be changed from PCue.<br />
Step 2. Go to Mod to modify active cue and press [Enter] to save the change.<br />
Step 3. Set FLTM (Follow Time) to <strong>de</strong>sired value (refer to “Set follow time between<br />
cues:” on page 67).<br />
To <strong>de</strong>lete a sequence and all cues:<br />
Step 1. Press [Menu].<br />
Step 2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].<br />
Step 3. Press [Up] / [Down] arrows until DSEQ appears. Press [Enter].<br />
Step 4. OK? prompt will appear. Press [Enter] to <strong>de</strong>lete stored sequence.<br />
68 17-Sep-02 02.9671.0001 E