SERVICE SPECIFICATIONS

A46DF AUTOMATIC TRANSMISSION - REAR PLANETARY GEAR (A46DF)
AT4798
AT4891
AT6251
AT4982
AT4788
(b) Install the ring gear to the intermediate shaft.
(c) Install the set ring.
4. INSTALL ASSEMBLED BEARING AND RACE AND
REAR PLANETARY CARRIER TO PLANETARY RING
GEAR
5. INSTALL REAR PLANETARY GEAR ASSEMBLY TO
OUTPUT SHAFT
(a) Coat the bearing and race with petroleum jelly
and install them onto the ring gear.
Bearing and race diameter:
Inside mm (in.) Outside mm (in.)
Race 30.1 (1.185) 48.5 (1.909)
Bearing 28.4 (1.118) 46.4 (1.827)
(b) Install the rear planetary gear assembly to the
output shaft.
AT-73