SERVICE SPECIFICATIONS

AT-34
AT4881 AT4765
AT4578 AT4765
Retainer
Retainer
SST
A46DF AUTOMATIC TRANSMISSION - OVERDRIVE DIRECT CLUTCH (A46DF)
AT4759
Open End
Open End
Z05013
Z05014
AT4757
AT4766
OVERDRIVE PLANETARY GEAR,
OVERDRIVE DIRECT CLUTCH AND
OVERDRIVE ONE-WAY CLUTCH
ASSEMBLY
1. INSTALL THRUST WASHER
Install the thrust washer to the overdrive planetary
gear, the grooved side facing upward.
2. ASSEMBLE ONE-WAY CLUTCH
(a) Install the one-way clutch into the outer race, the
open end of the retainers facing upward.
(b) Install the two retainers to both sides.
3. INSTALL ONE-WAY CLUTCH ASSEMBLY
4. INSTALL THRUST WASHER
(a) Install the thrust washer.
(b) Using a screwdriver, install the snap ring.
5. INSTALL OVERDRIVE DIRECT CLUTCH PISTON
(a) Coat new O-rings with ATF and install them on the
O/D direct clutch piston.
(b) Place SST on the direct clutch piston.
SST 09350-20015 (09369-20040)
(c) Being careful not to damage the O-rings, press in
the direct clutch piston into the clutch drum with
both hands.