SERVICE SPECIFICATIONS

SST
AT4754 AT4767
Flange
Cushion
PIate
A46DE AUTOMATIC TRANSMISSION - OVERDRIVE DIRECT CLUTCH (A46DE)
Claw
AT5879
Z05015
AT4974
AT4753
AT4879
6. INSTALL PISTON RETURN SPRINGS
(a) Install the eighteen springs and spring seat.
(b) Place SST on the spring seat, and compress the
return springs with a shop press.
SST 09350-20015 (09369-20040)
(c) Install the snap ring with a snap ring expander.
Be sure the end gap of the snap ring is not
aligned with the spring seat claw.
7. INSTALL CUSHION PLATE AND FLANGE
(a) Install the cushion plate.
(b) Install flange, the rounded edge facing upward.
(c) Install the snap ring. Be sure the end gap of the
snap ring is not aligned with the cutout portion of
the drum.
8. INSTALL DISC
AT-35
9. INSTALL OVERDRIVE BRAKE HUB
(a) Install the O/D brake hub.
(b) Using a screwdriver, install the snap ring. Be
sure the end gap of the snap ring is not aligned
with the cutout portion of the drum.