SERVICE SPECIFICATIONS

SST
SST
AT4650
AT6246
AT4838
A46DE AUTOMATIC TRANSMISSION - FRONT CLUTCH (A46DE)
Claw
AT4652
AT5881
Z05016
Z05017
AT4654
FRONT CLUTCH ASSEMBLY
1. INSTALL FRONT CLUTCH PISTON
(a) Coat new O-rings with ATF and install them on
the front clutch piston.
(b) Place SST on the front clutch piston.
SST 09350-20015 (09369-20040)
(c) Being careful not to damage the O-rings, press
the clutch piston into the front clutch drum with
both hands.
2. INSTALL PISTON RETURN SPRINGS
(a) Install the twenty springs and spring seat.
(b) Place SST on the spring seat, and compress the
return springs with a shop press.
SST 09350-20015 (09369-20040)
(c) Install the snap ring with a snap ring expander. Be
sure the end gap of the snap ring is not aligned
with the spring seat claw.
3. INSTALL PLATES AND DISCS
(a) Install the five plates and five discs.
Install in order: P =Plate D = Disc
D-P-D-P-D-P-D-P-D-P
AT-45
(b) Install the snap ring. Be sure the end gap of the
snap ring is not aligned with the cutout portion of
the front clutch drum.
(c) Install the disc.