Customer Name: Southern Light, LLC - AT&T Clec Online

Page 61 of 374
ATT 2 – NETWORK ELEMENTS AND OTHER SERVICES/AT&T-9STATE
PAGE 12 OF 44
Southern Light
1Q08 GENERIC INTERCONNECTION AGREEMENT – 03/10/08
2.1.4.7.2.3.2 If Southern Light fails to submit the LSR(s) or spreadsheet(s) for all of its Subsequent Embedded
Base by one hundred eighty (180) days after the date of AT&T’s Accessible Letter identifying the
Subsequent Wire Center List, AT&T will identify Southern Light’s remaining Subsequent Embedded
Base, if any, and will transition such circuits to the equivalent tariffed AT&T service(s). In the states
of Florida, Mississippi and South Carolina, those circuits identified and transitioned by AT&T shall
be subject to the applicable disconnect charges as set forth in this Agreement and the full
nonrecurring charges for installation of the equivalent tariffed AT&T service as set forth in AT&T’s
tariffs. In the states of Alabama, Georgia, and North Carolina, those circuits identified and
transitioned by AT&T shall be subject to the applicable switch-as-is rates set forth in Exhibit A of
Attachment 2. In the state of Louisiana, those circuits identified and transitioned by AT&T shall be
subject to the full nonrecurring charges for installation of the equivalent tariffed AT&T service as set
forth in AT&T’s tariffs.
2.1.4.7.2.3.3 For Subsequent Embedded Base circuits converted pursuant to Section 2.1.4.7.2.3 above or
transitioned pursuant to Section 2.1.4.7.2.3.2 above, the applicable recurring tariff charges shall
apply as of the earlier of the date each circuit is converted or transitioned, as applicable, or the first
day after the end of the Subsequent Transition Period.
2.1.5 Where facilities are available, AT&T will install Loops in compliance with AT&T’s Products and
Services Interval Guide available at AT&T’s Wholesale – Southeast Region Web site. For orders of
fifteen (15) or more Loops, the installation and any applicable Order Coordination (OC) as
described below will be handled on a project basis, and the intervals will be set by the AT&T project
manager for that order. When Loops require a Service Inquiry (SI) prior to issuing the order to
determine if facilities are available, the interval for the SI process is separate from the installation
interval.
2.1.6 The Loop shall be provided to Southern Light in accordance with AT&T’s TR73600 Unbundled
Local Loop Technical Specification and applicable industry standard technical references.
2.1.7 AT&T will only provision, maintain and repair the Loops to the standards that are consistent with the
type of Loop ordered.
2.1.7.1 When an AT&T technician is required to be dispatched to provision the Loop, AT&T will tag the
Loop with the Circuit ID number and the name of the ordering CLEC. When a dispatch is not
required to provision the Loop, AT&T will tag the Loop on the next required visit to the customer’s
location. If Southern Light wants to ensure the Loop is tagged during the provisioning process for
Loops that may not require a dispatch (e.g., UVL-SL1, UVL-SL2, and UCL-ND), Southern Light
may order Loop Tagging. Rates for Loop Tagging are as set forth in Exhibit A.
2.1.7.2 For voice grade Loop orders (or orders for Loops intended to provide voice grade services),
Southern Light shall have dial-tone available for that Loop forty-eight (48) hours prior to the Loop
order completion due date. This applies to all conversions from one provider to another provider as
well as Service Rearrangements as set forth in Section 2.1.12. Where Southern Light dial-tone is
not available on the conversion date the Loop will not be cut over and the Loop order will be
returned to Southern Light for rescheduling.
CCCS 61 of 370