Customer Name: Southern Light, LLC - AT&T Clec Online

Page 65 of 374
2.1.13 EEL to Loop Retermination
ATT 2 – NETWORK ELEMENTS AND OTHER SERVICES/AT&T-9STATE
PAGE 16 OF 44
Southern Light
1Q08 GENERIC INTERCONNECTION AGREEMENT – 03/10/08
2.1.13.1 Southern Light may utilize the EEL to Loop Retermination process to disconnect an EEL circuit and
reterminate the Loop portion of the former EEL circuit to a collocation arrangement in the enduser’s
Serving Wire Center (EU SWC).
2.1.13.2 This process is available when the existing Loop portion of the EEL will be re-used and the resulting
Loop will be subject to the rates, terms and conditions for that particular Loop as set forth in this
Attachment. This process will apply only to EELs that include as a part of its combination a DS1
Loop, UVL-SL2 Loop, 4-Wire UDL Loop (64, 56 kbs) and a 2-Wire ISDN Loop.
2.1.13.3 AT&T shall charge the applicable EEL to Loop Retermination rates found in Exhibit A. Southern
Light shall also be charged applicable manual service order, collocation cross-connect and EEL
(including the Transport and Loop portions of the EEL) disconnect charges as set forth in Exhibit A
of this Attachment.
2.1.13.4 The EEL to Loop Retermination process is not available when a dispatch outside the serving wire
center where the Loop terminates is required. If an outside dispatch is required, or if the Loop
portion of the EEL is not one of the Loop types referenced in Section 2.1.13.2 above, or if Southern
Light elects not to utilize the EEL to Loop Retermination process, Southern Light must submit an
LSR to disconnect the entire EEL circuit, and must submit a separate LSR for the requested
standalone Loop. In such cases, Southern Light will be charged the EEL disconnect charges and
the full nonrecurring rates for installation of a new Loop, as set forth in Exhibit A.
2.1.13.5 The EEL to Loop Retermination process and requirements will be handled in accordance with the
guidelines set forth in the Ordering Guidelines and CLEC Information Packages as referenced in
Sections 1.13.1 and 1.13.2 above.
2.2 Unbundled Voice Loops (UVLs)
2.2.1 AT&T shall make available the following UVLs:
2.2.1.1 2-wire Analog Voice Grade Loop – SL1 (Non-Designed);
2.2.1.2 2-wire Analog Voice Grade Loop – SL2 (Designed); or
2.2.1.3 4-wire Analog Voice Grade Loop (Designed).
2.2.2 UVL may be provisioned using any type of facility that will support voice grade services. This may
include loaded copper, non-loaded copper, digital loop carrier systems, fiber/copper combination
(hybrid loop) or a combination of any of these facilities. AT&T, in the normal course of maintaining,
repairing, and configuring its network, may also change the facilities that are used to provide any
given voice grade circuit. This change may occur at any time. In these situations, AT&T will only
ensure that the newly provided facility will support voice grade services. AT&T will not guarantee
that Southern Light will be able to continue to provide any advanced services over the new facility.
AT&T will offer UVL in two different service levels - Service Level One (SL1) and Service Level Two
(SL2).
CCCS 65 of 370