Sym Jet Euro X servicemanual - Scootergrisen
Sym Jet Euro X servicemanual - Scootergrisen
Sym Jet Euro X servicemanual - Scootergrisen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
14. REAR WHEEL/SUSPENSION<br />
Brake Hub Replacement<br />
Remove 4 nuts of cover and wheel rim, and then<br />
remove the wheel hub.<br />
Install the wheel hub and tighten the nuts.<br />
Tighten torque: 2.5 kgf-m<br />
Installation<br />
Install the rear wheel and tighten the nut.<br />
Tighten torque: 11.0 kgf-m<br />
Install exhaust pipe & muffler.<br />
Tighten torque (bolt): 3.3 kgf-m<br />
Tighten torque (nut): 1.2 kgf-m<br />
Install the body cover.<br />
Rear Shock Absorber<br />
Removal<br />
Remove body cover.<br />
Remove rear shock absorber upper & lower<br />
bolts.<br />
Remove rear shock absorber.<br />
Installation<br />
Install the rear shock absorber.<br />
Tighten the upper & lower mounting bolts to<br />
specified torque.<br />
Torque value:<br />
Upper mounting bolt: 4.0 kgf-m<br />
Lower mounting bolt: 2.7 kgf-m<br />
Press down the tail of the scooter for several<br />
times to check shock absorber operation.<br />
Installation all components in reverse order of<br />
removal procedures.<br />
14-4<br />
This chapter Contents<br />
Upper mounting bolt<br />
Lower mounting bolt