Sym Jet Euro X servicemanual - Scootergrisen
Sym Jet Euro X servicemanual - Scootergrisen
Sym Jet Euro X servicemanual - Scootergrisen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7. “V” TYPE BELT DRIVE SYSTEM/KICK-STARTER<br />
Clutch Block Replacement<br />
Remove clip and washer, and then remove<br />
clutch weight and spring from drive plate.<br />
7-12<br />
Caution<br />
Some of models are equipped with one<br />
mounting plate instead of 3 snap clips.<br />
Check if spring is damage or insufficient<br />
elasticity.<br />
Check if shock absorption rubber is damage or<br />
deformation. Replace it if necessary.<br />
Apply with grease onto lock pins.<br />
Install new clutch weight onto lock pin and then<br />
push to specific location.<br />
Apply with grease onto lock pins. But, the<br />
clutch weight should not be greased. If so,<br />
replace it.<br />
Caution<br />
Grease or lubricant will damage the clutch<br />
weight and affect the weight’s connection<br />
capacity.<br />
Install the spring into groove with pliers.<br />
This chapter Contents<br />
Spring<br />
Clutch weight<br />
Shock absorption<br />
rubber<br />
Shock absorption rubber<br />
Clutch block<br />
Spring<br />
Drive plate<br />
Snap clip
Change language