Sym Jet Euro X servicemanual - Scootergrisen
Sym Jet Euro X servicemanual - Scootergrisen
Sym Jet Euro X servicemanual - Scootergrisen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Crankcase Installation<br />
Clean the crankshaft with solvent and blow it<br />
with compressed air. Then, check for damage<br />
or other foreign materials attached.<br />
Install new bearing into right crankcase.<br />
Caution<br />
All rotation and sliding surfaces have to be<br />
applied with clean engine oil.<br />
Remove all gaskets onto the crankcase<br />
interfaces and flat it with special tool.<br />
Install new bearing into left crankcase.<br />
Install crankshaft onto the left crankcase.<br />
Install left crankshaft puller and install bush onto<br />
crankshaft.<br />
Screw the left crankshaft puller onto crankshaft.<br />
Turn the puller in C.W. direction and then<br />
completely screw the puller to bottom.<br />
Lubricate crankshaft bearing and bearing seat<br />
with 2-stroke engine oil.<br />
Apply liquid gasket and dowel pin onto the<br />
interface of left crankcase.<br />
This chapter Contents<br />
9. CRANKCASE/CRANKSHAFT<br />
Bearing driver 6204<br />
Bearing driver 6204<br />
Collar<br />
L. Crank shaft install bush<br />
Dowel pin<br />
L. Crank shaft puller<br />
Apply liquid gasket<br />
9-5
Change language